The first time a lot of decoration was done, it was the second-hand monk who was puzzled. Let's take a look at the tiles, how big are the tiles? Is it the first paving or the first paving? Before the renovation, there was nothing to study this all day. It was all thirsty. In fact, it is not difficult, as long as you listen to this website Xiaobian to provide you with the decoration tiles need to pay attention:
1, according to the size of a single space to choose: This is an important reference factor to consider the tile specifications, the size of a single space is proportional to the size of the selected tiles. Generally speaking, for a floor tile, if the single space area is less than 30m2, consider using 600*600mm; if it is 30-40m2, 600*600mm, 800*800mm are available; if it is more than 40m2, consider it. Use 800*800mm. If the lighting is not good, light color is recommended, such as light-colored tiles.
2, need to consider the size of the visual space: for example, if the living room is blocked by furniture, there are many places, that is, the actual use of the ground visible size, if the viewing area is small, you should consider using a smaller size floor tiles.
3, the ratio of the length and width of the space and size: In terms of effect, to tile all the whole tile as well, that is to the side as far as possible not cut tiles or cut tiles, try to reduce waste, in general, the specifications of the tiles The bigger, the greater the waste.
4, cost and cost issues: For the same brand of the same series of products, the greater the size of the tile, the corresponding price will be higher, so do not blindly pursue large specifications, decoration must be combined with the budget when buying building materials must , At the same time, the labor costs for paving may vary. Otherwise, you will be able to drop your glasses when you finish your final bill.
Matters needing attention The general construction party's practice is: first paving the wall tiles, then paving the floor tiles, paving the wall tiles after paving the floor tiles, will not affect the wall tiles, not delay the construction period, so the general construction side will take this approach . If you first lay out the floor tiles and then spread the wall tiles, you must wait for the floor tiles to dry before laying the wall tiles. If the floor tiles are not completely solidified, you can directly tile the wall tiles and step on the floor tiles to create artificial tiles. Hollow, loose and high and low inequality issues. Therefore, if you first floor tile, you need to wait until the floor tile is solid and then spread the wall tile. It is best if it is not less than 24 hours.
Wall Construction Tile Shop Floor Tiles Room Furniture Living Room Tiles Price Tiles Specifications
Vinyl Pool Light,Underwater Led Pool Light,Vinyl Liner Pool Light,Resin Filled Vinyl Led Light
Guangzhou Qshine Pool Lights Manufacture Co., Ltd , https://www.gdqshinepoollight.com