I. Profile quality of steel doors and windows
The appearance of the profile should be observed. Note whether the color of the frame and the fan profile that make up the door and window are the same, whether the appearance is uniform, and whether the distribution of the cavity is reasonable. In the formulation of steel door and window profiles, calcium carbonate is usually added as the filler material, and some manufacturers reduce the cost. If the amount is too much, it becomes a calcified plastic. The surface of doors and windows made of this plastic lacks luster and is slightly rough. Hard and brittle, it looks like a rough feeling like stones, normal steel doors and windows, the surface is usually shiny, very tough.
Two. Door and window gaps and seals
Look at the tightness of the fit between the various profiles, whether the incision is flush with the fit, the height of the profile overlap, and so on. General steel doors, the main part of consideration is the door frame, the gap between the fan, the door trim and the door edge, the various sections of the shutter connection, seals, etc.; if assembled door panel, but also consider the door Gap; is to open the door but also whether the two doors closed after the light and so on. Similarly for the use of plastic steel windows, in addition to the assembly of a variety of profile assembly clearance to be considered, the sealing strip is uniform and solid is also very important, the interface gap should not exceed 1mm, which reflects the window sealing performance. Plastic-steel doors usually do the inner door of a building, and the sealing requirements are not so high. Various clearance values ​​are stipulated in national standards, but for customers, the smaller the gap value at various profile connections, the tighter the fit and the more exquisite the assembly process, which reflects the assembly level and the accuracy of the assembly tools.
3. Welding of steel doors and windows
To see if the weld is flush, whether there are cracks, and whether the internal and external corner seams are clean and beautiful, use a box ruler to measure the diagonal size of the steel doors and windows, the diagonal size difference should be no more than 3mm, diagonal difference The smaller the display process, the finer it will be for installation.
4. Hardware of steel doors and windows
The quality of hardware has a certain influence on the life of doors and windows. The hardware used should look thick, and the surface gloss is better, the protective layer is denser, and there is no scratching phenomenon. The most important point is that the opening should be flexible.
5. Reinforced steel for steel doors and windows
According to national standards, there are different requirements for the wind pressure resistance of plastic steel doors and windows. The frame of plastic steel doors and windows and the inner cavity of the fan shall be equipped with reinforced steel. According to the height, there are three types of reinforced steel of 1.2mm, 1.5mm and 2.0mm to ensure the The product's ruggedness and longevity. In order to reduce costs, some manufacturers do not install or load reinforced steel that does not meet the requirements. Customers should pay special attention when purchasing products. Usually the inspection methods are as follows: 1. The reference weight method estimates that the weight of doors and windows is nicknamed, and the weight of doors and windows with reinforced steel is heavy, and vice versa. 2. Use a magnet to place the frame and fan on the door and window. If the magnet is adsorbed, there will be reinforced steel in the profile, and vice versa. 3. Observe the frame of the door and window, whether there are screws fastening the steel on the fan, it can also prove whether there is reinforced steel.
In short, customers should be cautious when choosing products, try to use regular manufacturers' products, and strictly inspect them so as not to be deceived.
Doors Doors and Windows Hardware Window Shutters Shutters
Residential or commercial.Large-scale or small. Cultural stone caters to your sensibilities and budget.It's widely used in the interial and exterial wall like background and garden landscaping.
- Natural stone material with different colors and designs offer modern,classcial and luxury styles
- With advanced inappearance and competitive price.
- High quality and Washable and durable,Dust - proof and the color never fade.
Cultural Stone Slate,Quartzite Culture Stone,Stone Wall Panels,Wall Natural Stone
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com