MCB series magnetic gear pump (referred to as magnetic pump), usually by the motor, magnetic coupling and gear pump components. Its main feature is the use of magnetic coupling transmission of power, no leakage, when the motor drives the magnetic coupling outer magnet rotation, the magnetic field lines through the gap and the isolation sleeve, acting on the magnet, the pump rotor and motor synchronous rotation , No mechanical contact to transmit torque. At the power input of the pump shaft, there is no dynamic seal and therefore no leakage at all as the liquid is enclosed in a stationary isolation sleeve. Non-leakage magnetic pump is the ideal green chemical equipment, it will increase the chemical industry, petrochemical, pharmaceutical and printing and dyeing production and other enterprises to reduce costs, eliminate pollution, protect the environment, safety and labor protection, etc. bring higher economic benefits And social benefits. MCB series magnetic gear pump is suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, defense and other industries. It is ideal for conveying flammable, explosive, volatile, toxic, rare and valuable liquids and various corrosive liquids. It is suitable for the transportation of fluids with certain lubricity without solid particles and fibers, the temperature is not higher than 250 ℃ and the viscosity is 5 ~ 1500cSt in various industrial processes. For corrosive or high hygiene requirements of the occasion can use stainless steel gear pump.