High temperature gear pump air intake situation

The following describes the high temperature gear pump to exclude inhalation air solution to this problem: 1. High-temperature gear pump pump body and both sides of the cover for direct contact with the hard seal, if the contact surface flatness does not meet the requirements, the pump at work Similarly, the pump cover and gland are also in direct contact with the air is also easy to invade; if the lid is a plastic product, due to its damage or deformation due to temperature changes, it will make the seal lax and Into the air. The way to get rid of this kind of trouble is: when the flatness of the pump body or pump cover can not meet the stipulated requirements, it can be grinded back and forth on the flat board with the gravure pattern of gold sand, or on the surface grinding machine Flatness does not exceed 5μm, and the need to ensure the verticality of the plane and the hole requirements; for the pump cover and gland at the leak, can be coated with epoxy adhesive sealing. 2. High-temperature gear pump on the shaft generally used to seal the oil seal. If the locking lip spring off, or the oil seal installed, or its lips were injured, aging, will make the back end of the seal often in negative pressure and inhale the air, the general can replace the new seal to be resolved.

Biaxial Geogrids

Item	TGSG15-15	TGSG20-20	TGSG25-25	TGSG30-30	TGSG35-35	TGSG40-40	TGSG45-45
Longgitudinal Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Transverse Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Longitudunal Elongation ≤ (%)	15
Transverse Elongation ≤ (%)	13
Longitudinal Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Transverse Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Longitudinal Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Transverse Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Width ≤ (m)	6

Feature:

● Increase the bearing capacity of the roadbed and foundation and prolong their service life.
● Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
● Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense.
● Prevent culverts from flawing.

● Enhance earth slope and prevent water loss and soil erosion.

● Decrease underlayer thickness and save manufacturing cost.

● Enhance the stability of side slope turf net patch to improve greening.
● Replace wire netting used in mine as intermediate ceiling netting.

Product Application

Reinforced soil engineering Reinforced soil retaining wall, steep slope and the reinforcement and consolidation of the soft ground.

Road construction Ground treatment, reinforcement of the bridge abutment, reinforcement of the enbankment, reinforcement of the pile-net roadbed.

Irrigation projects Protection of port, approach lane, seabeach, channel, river channel, dam and other irrigation projects.

Enviromental projects Land reclamation, prevention and controlling of the desertification, and the composite protective structure in the landfill sites of urban garbage and waste.

Mine engineering Coal mines, side slope protection of opencast mines, slope protection for the dumping site of the opencast mines,reinforcement to counter dam in the large tailing ponds of the metallurgical mines.

Soil engineering Construction of stuffing and package system of heavy soil engineering.

Slope protection Slope protection in the area affected by earthquake.

Dump leaching Ground consolidation of large dump leaching and slag site.

FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001.
certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the
plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.

Plastic Geogrids,Plastic Biaxial Geogrid,Civil Engineering Geogrid,Plastic Civil Engineering Construction Grid

Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com