The so-called passenger flow is what we usually call the flow of people, popularity, and more professional is the number of visitors, the most intuitive way to evaluate the performance of a mall is to go to the peak period of the mall and usually do a passenger flow statistics, if you want To be more detailed, you can observe the number of cash registers in the mall, the queue status of the customers, the number of shipping cabinets, the number of shopping carts and usage, etc. to determine the passenger flow of the mall. Through visual inspection and comparison, we can basically grasp the number of passengers in this mall, and its performance will be reduced.
Everyone understands a simple formula: sales = number of visitors × customer unit price. The amount of passenger traffic is not only the core control and concern of any store in the pre-site selection stage, investigation stage, preparation period and post-operation period, but also a prerequisite for directly measuring the performance and competitiveness of the mall. The decline in store traffic, directly leading to the decline in sales, is the primary problem of the retail elite's nervous nerves, must go all out to deal with and solve.
Main factors affecting and restricting passenger flow in stores
What are the main factors affecting and restricting the flow of stores for different business environments and different formats and locations? The author believes that there are mainly the following aspects:
1. The site selection in the early planning stage of the shopping mall was improper, and the traffic convenience and road constraints were not effectively evaluated. For example, people's habitual thinking is like going down the road and downhill. If two supermarkets of the same size are on the road and one is on the road, then the chances of customers in the middle of the two supermarkets will be obvious. More than the above. For example, opposite the main entrance of the shopping plaza is a national highway with a large traffic flow, and the quality customers of this shopping plaza are on the opposite side of the road. In the absence of pedestrian passages and overpass facilities, too many vehicles pass the road. Customers have certain security risks. The customer's subconscious is worried about the inconvenience of passing, and naturally it will cause fear. This road has become an invisible killer restricting the passenger flow of the shopping mall.
2. Competitors robbed each other and squeezed. Under the original limited population size of the same area, shopping malls and shopping malls infiltrated each other and competed with each other. A piece of cake was originally eaten by five people, and the relative passenger flow was obviously diverted. Encroached.
3. Shopping malls lack features from positioning to management. Faced with the needs of different customers, there is no way to increase the products that attract customers. For example, there are no star products, special brand sensitive brands to enrich the product structure, and serve as a price image to attract passengers.
4. The merchandise structure is blurred, and the marketability of goods is not right. It deviates from the lifestyle habits of local consumers and target customers. Naturally, there is no way to obtain stable passenger flow.
5. The accuracy and rationality of the promotion model have not been strictly evaluated. Good promotion models such as sweepstakes, buys, discounts, coupons, etc. are also key factors in getting passenger flow.
6. The independent retail format positioning and commercial supporting functions are not perfect. If there are no supporting restaurants, large parking lots, and entertainment venues, the location of the shopping malls is not in the commercial area. The influence of the business district is not proportional to the scale. The single-wood is difficult to support, and the radiation capacity and the capacity of the shopping malls of the shopping malls are greatly reduced.
7. The design of the store itself is problematic. There is no strict planning in channel design, entrance and exit design, etc., and scientific analysis and adjustment are not possible.
The vibration sensor(Vibration Transmitter) is one of the key components in the testing technology of Vibration Measurement. Its main function is to receive the mechanical quantity and convert it into a proportional electric quantity. Because it is also an electromechanical conversion device. So we sometimes call it a transducer, a vibration pickup, etc.
Commonly used vibration sensors are as follows:
1. Piezoelectric resonant
The piezoelectric sheet is used to receive the vibration signal, and the resonance frequency of the piezoelectric sheet is relatively high. In order to reduce the resonance frequency, it is realized by increasing the mass of the piezoelectric sheet vibrating body, and using a spring ball instead of an appendage to reduce the two resonance frequencies and enhance the vibration effect. Its advantages are high sensitivity and simple structure. However, the signal needs to be amplified and sent to a TTL circuit or a single-chip microcomputer circuit, but it is enough to use a triode single-stage amplification
2. mechanical vibration
In the traditional vibration detection method, after being vibrated, the spring ball vibrates at a reduced amplitude for a long time, and this vibration is easy to be detected by the detection circuit. The vibration output switch signal is determined by the output impedance and the resistance value of the matching output. According to the input impedance of the detection circuit, it can be made into a high-impedance output mode.
3. Micro Vibration Sensor
The mechanical vibration sensor is miniaturized, the vibration body is carbonized and sealed, and its working performance is more reliable. The output switching signal is directly connected with the TTL circuit and or the input circuit of the single-chip microcomputer, and the circuit structure is simple. The output impedance is high, and the quiescent working current is small.
Advantages of Vibration Sensors
1. Small size and light weight. It can be applied to some vibration test systems that are greatly affected by the additional mass.
2. It has a wider response frequency range of 4Hz-2000Hz than the magnetoelectric speed sensor, and the mechanical moving parts are not easy to damage
If you have any questions about the vibration sensor, please contact us, we will provide you with professional and timely answers.
Vibration Sensor,Accelerometer Sensor,Velocity Sensor,Accelerometer Vibration Sensor
Wuxi Winsun Automation Instrument Co., Ltd , https://www.winsunwx.com