In normal life, if you have a careful door lock, you will find that the door locks are not easy to use in many places. For a long time, its surface is prone to rust, peeling, discoloration, etc. Some handles are set. Not very humanized. As a furniture lock used in our home, how to buy it? Do you know how to maintain the furniture lock? Next, follow the decoration home network Xiaobian to learn about the relevant content!
First, how to choose furniture lock
1, check the furniture lock implementation standards, locks are implemented standards, some foreign locks are executed QB standards, the quality of the lock is also higher, so the imported locks are generally more expensive. Now some brands of locks are already implementing QB standards. Only some small manufacturers are still implementing the original GB standard, so be sure to see the implementation standards of locks when purchasing.
2, can feel the quality of the locks, in addition to observation, we can also try to feel the quality of the lock. In general, the heavier the lock, the thicker the material used on the surface, the more resistant to wear and the higher the quality. Conversely, the lighter the lock, the thinner the material used, the lower the quality and the easier it is.
3, pay attention to the lock material, buy indoor door locks must pay attention to the material of the lock. Earlier we said that the stainless steel lock is, in addition to the stainless steel lock, copper lock and zinc alloy lock is also a good choice, copper lock mechanical performance is superior, but the price is relatively high; zinc alloy lock is strong and wear resistant, corrosion resistant Strong.
4. Observe the processing quality of the surface of the lock. Observing the quality of the surface of the lock is also the key to measuring a good lock. At present, there are mainly three kinds of surface treatments for locks on the market, namely coloring, painting and electroplating. These three treatments are to add a layer of dense protective film on the lock surface, in addition to the anti-corrosion and anti-rust effect, The lock is more beautiful. These three treatment methods are undoubtedly electroplating, the coating is smooth and uniform, the color is bright, there is no air bubble, and the anti-corrosion and anti-rust ability is first-class.
Second, how to maintain the furniture lock
1. In normal use, we must ensure that the part of its lock body drive is driven by lubricant, so as to ensure that the door lock can smoothly rotate and extend the service life during use, and it is checked once every six months or one year. Just fine.
2. If it is difficult to pull out or insert it when using it, we can add some small amount of graphite powder or pencil powder to its lock cylinder to ensure smooth key insertion. Finally, we need to check the gap between the lock body and the lock plate, the height of the lock tongue and the lock plate hole from time to time. If there is a change, then you need to adjust the position of the door hinge or the lock plate.
The above is a detailed answer to the Xiaobian, I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting content, please continue to pay attention to our decoration encyclopedia!
Aluminum Foil In Oven,Reynolds Aluminum Foil,Heavy Duty Aluminum Foil,Reynolds Wrap Aluminum Foil
Henan Everwin Trade Co., Ltd. , https://www.ewaluminium.com