Technical Parameter
Please send us your drawing or details technicial informations, we will design and manufacture according to them for you.
Bore diameter (mm) | 95 |
Rod diameter (mm) | 50 |
Stroke (mm) | 600 |
Working pressure (Mpa) | 37 |
Material | |
Rod | CK45 |
Tube | C20; 27SiMn |
Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
Â
Management System
           ISO9001                      ISO/TS16949                      IPR
Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.
Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.
Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.
Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.
FAQ
Q1: Are you a trading company or manufacturer?
A1: We are the manufacturer with Exporting License.
Q2: How long have you been in Hydraulic Cylinder industry?
A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.
Q3: How long is your warranty period?
A3: We offer 13 months warranty period after on board.
Q4: How long does it take to process orders?
A4: It usually takes 20-30 days to process. We don't have stock.
Q5: What's your cylinder PPM?
A5: 5000 PPM. We do 100% inspection before delivery.
Q6: Have you been exported to overseas?
A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.
ContactLena LiÂ
Tel: 86-535-6523027Â Â Â Â Â Â Â Â Fax: 86-535-6528663Â
Website: www.fasthydraulic.com  www.yantaifuture.cn
Technical Parameter
Please send us your drawing or details technicial informations, we will design and manufacture according to them for you.
Bore diameter (mm) | 95 |
Rod diameter (mm) | 50 |
Stroke (mm) | 600 |
Working pressure (Mpa) | 37 |
Material | |
Rod | CK45 |
Tube | C20; 27SiMn |
Company Introduction
Built in 1973
Total area 456000 square meter
400 employees, 70 engineers
More than 400 sets equipment
National Patents: 71
Â
Management System
           ISO9001                      ISO/TS16949                      IPR
Quality Control
We use Solidworks to design cylinders and do force analysis.
Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.
Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.
Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.
Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.
FAQ
Q1: Are you a trading company or manufacturer?
A1: We are the manufacturer with Exporting License.
Q2: How long have you been in Hydraulic Cylinder industry?
A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.
Q3: How long is your warranty period?
A3: We offer 13 months warranty period after on board.
Q4: How long does it take to process orders?
A4: It usually takes 20-30 days to process. We don't have stock.
Q5: What's your cylinder PPM?
A5: 5000 PPM. We do 100% inspection before delivery.
Q6: Have you been exported to overseas?
A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.
ContactLena LiÂ
Tel: 86-535-6523027Â Â Â Â Â Â Â Â Fax: 86-535-6528663Â
Website: www.fasthydraulic.com  www.yantaifuture.cn
Self-tapping threaded inserts are suitable for creating heavy-duty, wear-resistant and vibration-proof fastenings in materials with low shear strength, such as aluminium, brass, bronze, cast iron or duro and thermoplastics. Threaded inserts with cutting slot are available in steel and stainless-steel versions.
Self Tapping Insert,302 Self-Tapping Insert,Self Tapping Insert Type 302,Thread Inserts Type Of 307 Steel
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com