After the newly renovated house has lived for many years, the floor will have more or less wear, and the overall effect is unsatisfactory. If it is a large-area replacement floor, it will take a lot of manpower and material resources, and overall it is not very cost-effective. Overall, the renovation of the old floor is a good method, but everyone does not understand the renovation of the old floor, how to refurbish the old floor ? What kind of old floor is suitable for renovation? Below, Xiao Bian will tell you relevant information.
First, how to refurbish the old floor ---step:
1. Before the old floor is refurbished, it should ensure the cleanliness of the house and remove all the items in the house;
2. The original surface of the floor polished 1-2 mm;
3. Then putty, coloring, lacquer, wax polish. We should pay special attention to the step of painting. We usually brush the primer and paint twice, and when it encounters flaws on the floor surface, we need to brush the primer several times.
Second, how to refurbish the old floor - Note:
1. It should be noted that not all floors can be refurbished. Only solid wood floors, engineered wood floors and bamboo floors with floor thicknesses of 4 mm or more can be refurbished. As the initial grinding will wear away 1-2 mm, the floor that is too thin will easily grind out the middle layer, which will affect the life of the floor. Therefore, before renovating, it is best to find out the thickness of the floor surface of your own floor.
2. If the color of the wood composite parquet block is not the saturated color but the surface coloring, or the veneer layer of the color is relatively thin, the parquet effect will be damaged after polishing, and it is recommended not to refurbish.
3. If it is a laminate floor, it cannot be refurbished because there is a layer of aluminum oxide wear-resistant layer on the surface. The renovation will destroy the wear layer and exacerbate the aging of the floor.
4. If the floor has been damaged, mildewed or deformed, it is generally difficult to remediate the situation in serious situations.
5. In order to ensure the quality of floor renovation, it is best to ask a more professional refurbishment company or cleaning company to take charge of this project. If conditions permit, it can also invite professional supervision personnel to supervise the construction.
Third, the old floor renovation --- price
It is more cost-effective to buy new floors than to renovate. According to different construction processes, the price of old floor renovations ranges from RMB 30-50 per square meter. Only 10% - 20% of the floor reloading costs, wooden floor can also be refurbished several times.
Fourth, what kind of old floor is suitable for renovation?
The refurbishment of solid wood composite parquet flooring is not only limited by the thickness of the surface layer, but more importantly, whether the wooden blocks with different colors are impregnated with color, the veneer layer is thin or the surface is colored. If only the surface coloring, or the veneer layer with different colors, is relatively thin, then the effect of the mosaic after the polishing is likely to be destroyed or even disappear.
The laminate flooring is made of wood chips. The surface is covered with a thin layer of aluminum oxide wear. It is very thin. The floor cannot be refurbished. When it is worn or damaged, it can only be replaced with a new one. Otherwise it will exacerbate the aging of the floor.
Xiao Bian concludes : The relevant contents of how the old floor was refurbished will be introduced first. We can choose the corresponding old floor renovation service according to our own actual situation. The floor after renovation can also be given a new brilliance, which will make the home a big change. I hope this article helps you. More exciting information is on this site.
Wooden floor floor installation
LEDER technology`s LED pool light is specifically designed to replace incandescent bulbs in swimming pool underwater light fixtures. Installing a 12 Volt bulb into a 120 Volt socket may permanently damage your pool's lighting system. The brightness of colors is up to 2x brighter than other cheaper bulbs. All colors can fill the whole pool. Multiple lamps can be synchronized to change color. 16 color mode: 7 brilliant fixed colors, 9 dazzling light show press the button in the remote controller to directly select the color you want.
LED pool light is used for swimming pools, water sports fields, ocean activity areas and so on.We insist on independent design, independent research and development.LED pool light is a much required lighting solution.
Features:
• Independent design
• It has high water resistance
• Energy province electricity
• Contracted design
• Color temperature :3000k-6000K
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
LED pool light is known for its energy efficiency and durability.We have a series of LED pool lights to show you, which will meet your requirements for activities in the water.
We have rich production experience in lighting .Except LED Pool Light, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light ,LED Bollard Light ,Outdoor Wall Light & Step Light as so on .
Floating Pool Lights,Swimming Pool Lights,Solar Pool Lights ,Above Ground Pool Lights
LEDER LIGHTING CO.,LTD , https://www.lederlight.com