Every home decoration must be paved with tiles, and the paving of tiles is a very delicate activity, so be careful when laying tiles. The paving methods of floor tiles of different specifications are different, and different paving methods will also affect the overall decoration effect and quality. Then, what are the methods for laying floor tiles ? What should I pay attention to when laying floor tiles? The following small series will give you a detailed explanation.
Tile laying methods and precautions
1. The dry-laying method for floor tiles: The first step is to wet the ground with water to remove debris and floating sand. To wipe the bonding layer again, it is necessary to pay attention to the use of 1:3 dry cement slurry, lay flat according to the horizontal line, and then put the brick on the mortar with a rubber mallet to tap. At this time, the floor tile is removed and the grout is poured, and then the floor tile can be leveled and smoothed. The dry shop method can effectively avoid empty drums, bubbles, etc., caused by the paving process. However, the technical content of the dry shop method is relatively high, so the cost will be more expensive.
2. Wet-laying method of floor tile laying method: Nowadays, the commonly used method of laying floor tiles is the wet-laying method. This kind of paving method differs from the dry-laying method in that it replaces 1:3 dry grout with cement. Mortar and ordinary water. It should be noted that this paving method tends to produce bubbles and empty drums during the paving process, which will affect the service life of the tiles. It is also because of this reason that it is cheap and easy to operate.
3. The wave-laying line-laying method of floor tile laying method: This paving method is also called lace or waveguide line, edge line and so on. This kind of paving method is mainly used on the ground or on the entrance, etc. It is used as the decoration line made on the floor of the building along the wall, and the width is not the same. This layout is different from the overall floor color to increase the design effect.
4. The traditional way of paving tiles: This paving method is the most traditional way of paving. The laying of attention should be: to be paved with the wall parallel to the way, the bricks to be aligned and can not be left seams, while using the same color with the seam of the seaming agent, this looks fresh, clean, generous Decent.
5. I-shaped shop floor tile laying method: This paving method is a slight change in the traditional way of paving, not according to the traditional method of straight shop, but instead to go word.
6. Dislocation method of floor tile laying method: This laying method is to rotate the square laying method by 45 degrees, which is similar to the traditional laying method. The straight line is very smooth, and the infinite extension has a very good visual impact. force.
7. Group spelling method of floor tile laying method: There are all sizes of floor tiles in this paving method. The patterns are rich and the patterns are clear.
8. Irregularity method of floor tile laying method: This kind of paving method is arbitrarily paving, not paving according to requirements, no need to care about the shape. The lines of this method are natural, messy and tangible. More suitable for leisure areas.
The article concludes: Each style of house decoration is not the same, so the floor tile method used is not the same. Please pay attention to the matters needing attention in the above brick laying method and floor tile laying so that it will not be easy to make mistakes when laying on the ground.
Polycarbonate Corrugated Sheet
High Light Pc Sheet,Polycarbonate Sheet Double Wall,Polycarbonate Corrugated Sheet,Polycarbonate Wave Panel
SuZhou NiLin New Material Technology Co.,Ltd , https://www.sznlpc-sheets.com