KCB stainless steel gear pump is mainly used for conveying lubricating oil in the lubrication system of various machinery and equipment. It is suitable for conveying the oil with the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) and the temperature below 300 ℃ Lubricating oil. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Uses: It can be used as a transmission and booster pump in the oil delivery system. It can be used as a fuel pump for conveying, pressurizing and injecting in the fuel system. It can be used as a lubricating oil pump in all industrial fields. Scope of application: KCB series gear pump is mainly composed of gear, shaft, pump body, safety valve and shaft end seal. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of 1.5 times the pump rated exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation.