Bathroom Faucet Mixer Basin Faucet    Â
Â
Technical Databse
| Material  | Brass body + zinc lever |
| Finish |
Chrome plated Antique Bronze, Brushed Nicked, Gold etc. available |
| Handle | Single levers |
| Cartridge |
- 35/40mm ceramic cartridge - 500,000 life cycles - Sedal, Keros, SCC, Kone, Hain-Yo, KCG etc. available |
| Water Pressure Testing | 1.3 Mpa |
| Configuration | 1 hole or 2 holes installation |
| Fittings | Brass or Stainless Steel Fittings |
| Warranty | 5 years |
| Certification | ISO9001, CE and ACS approved |
| OEM&ODM Service | Provided |
Â
Â
Â
Â
QA/QC Introduction:
We were established in 1989 as a developer and manufacturer of faucets and bathroom accessories. Over decades, our main products series have been expanded to basin faucet, bathtub faucet, kitchen faucet, shower faucet and stainless steel hose, totally for almost 40 series. We persist in our mission statement of "To Provide the Highest Quality Products with the Lowest Total Cost that Meet or Exceed Our Customers' Requirements in a Timely Manner". The sequential QA and QC procedures are as follows:Â
1) Material inspection
2) Chemical examination lab
A system to test and control compositions of original materials:Â
1) A test and validation program was developed whereby all of our products are sampled and inspected. The results are submitted for comparison with test results.
2) Establish a procedure to check products at all stages of the manufacturing process from raw materials, in-process materials and validated or tested materials to finished goods. Besides, we have also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing processÂ
3) There is a system that tracks in-process defects and other non-conformances. These records are used to analyze root causes and solve the problemsÂ
4) We have established a quality manual, which is maintained as means to ensure that products conform to specified requirements
5) 100% inspection in assembly lines: all controls, inspections, equipment, fixtures, total production resources and skills are inspected to consistently achieve the required quality levels
We Provide You With Sincerely Service, if you interest, please contact us NOW!!!
Tel:86-577-85227866
Fax:86-577- 85229208
Â
Coating Deletion Wheel(wet use)
It`s special for [Golive [Coating Deletion Machine.It is suitable for LOW-e and Solar Glass . Refrigerant must be used.Max speed is 2800RPM/MIN.
It has through-type and step type for your selection.
Quick Details:
Place of Origin: Jiangmen, China (Mainland)
Brand Name: LANSHI
Abrasive: New material
Size: standard size or custom size
Hole/Bore: 22 , 50, 76.2mm
Packaging & Delivery
Packaging Details: Carton.
Delivery Time Inner 2-7 days .According to the quantity of your order
Frequently Asked Questions(FAQ)
1, Are you a manufacturer?
Yes,we are manufacturer since 1994, 23 years production experience.
2,Do you have the right of Export?
Yes,we have the right of Import and Export.
3,What`s your payment term?
T/T 30% deposit,T/T 70% before shipment.
4, What is the minimum order quantity?
No MOQ, Just 1 pcs for testing is acceptable.
5,Can you provide OEM?
Yes,we can produce as your drawing also we can printing on the wheels as your requirement.
6,which modes of transport can you provide?
As your request,we can arrange shipment by Express ,by air or by sea etc.
Any problems,please feel free the contact with me .Thank you!
Coating Deletion Wheel
Coating Deletion Wheel ,Edge Deletion Wheel For Glass,Coating Deletion Wheel For Glass,Glass Coating Deletion Wheel
LANBAO ABRASIVES CO.,LTD , http://www.lanbaoabrasives.com