Although a small variety of ceramic tile, but the combination of performance and use is to buy it as the highlight of the decoration procurement, the choice of tiles is a university asked. There are a wide variety of tiles on the market, and what kind of tiles to choose is often confusing to the owners of the first renovation. Experts point out that knowing the tiles can only select tiles.
Langhua Shower Room    Hoger Hardware
Different types of tiles have different uses
At present, there are many varieties of ceramic tiles available on the market. When choosing a tile, you may want to first understand the whole picture of the tile.
Glazed tiles: bricks that have been burnt glazed on the surface are used daily most.
Whole body brick: The surface is not glazed, the material and color of the front and back are the same, and there is a good anti-skid and wear resistance.
Polished bricks: Bricks that have been polished after being polished, have a high surface hardness and are very wear-resistant.
Vitrified tiles: Polished light, the surface as smooth and translucent glass mirror, the hardest kind of tile.
Mosaic: Generally, it consists of dozens of small bricks, one large brick, which is resistant to acid and alkali, impermeable to water, and not easily broken.
Interior Wall Tiles: Ceramic materials used on interior wall surfaces.
Floor tiles: Ceramic products for the ground.
Square tiles: ceramic products used in outdoor large squares and sidewalks.
Ceramic tile: refers to a ceramic product with a water absorption ≥ 6%, which is mainly used for wall decoration.
Semi-ceramic semi-tile: refers to a ceramic product with a water absorption of ≥3% and <6%.
Full-tile: refers to a ceramic product with a ceramic water absorption of <3%, which can be widely used for wall and floor decoration.
How to select tiles, the industry pointed out that the following four aspects can be started:
Look: See if the tile appearance is straight. Look for whether the surface of the tile is spotted, cracked, bumped, corrugated, peeled, missing glaze, and the like. Look at the tile patterns. A good product pattern is delicate and realistic, but the poor quality tile design will lack color, break lines, and misalignment.
Listen: Listen to the sound of tiles. The method is a hand-held brick side, one-handed percussion bricks, the sound of a good brick is crisp and loud, and the poor brick is low and turbid.
Ratio: Look at the hardness of the tiles. To put it plainly, bricks of the same specification are smashed in the hand, and the more bricks in the sink, the greater the density and the higher the hardness. Comparing the size of the bricks is the same, small brick deviations are allowed within ±1 mm, and large bricks are allowed within ±2 mm.
Try: Look at the water absorption on the back of the tile. Turn the tiles over and drop some water on the back. The slower the seepage, the denser the texture and the better the inner quality.
Tiles should be cleaned before the base, such as lime plaster, latex paint, wallpaper, etc. on the wall, or dirt on the ground, be sure to clean, otherwise the cement mortar and the grass-roots layer adhesion is not strong; In addition, if the wall itself has cracks, Tiles should be tiled after proper treatment to avoid cracking or detachment of wall bricks caused by cracks in the basic structure in the future. Leveling or verticality of the floor or wall should be leveled with cement mortar.
Posted floor tiles should be from the inside to the outside, such as the slope of the ground or there are leaks children, should pay attention to the direction of the drainage slope; wall tiles should be laid from the bottom, for the sake of beauty, the bottom of the brick should be posted. After pressing the tiles, press the floor tiles. When there are half bricks, you should try to place them below. In addition, a wall cannot be attached to the top at a time to prevent the tile from being heavy and causing it to fall.
Wall tiles have a high moisture content. Before the tiling, the base layer should be fully watered and wet. Tiles should also be soaked in water for at least 20 minutes before use. Otherwise, the moisture in the mortar is rapidly absorbed by the dried substrate and tiles and condenses quickly, which affects the fastness of the bond. Wall tiles will also absorb moisture from the cement so that the cement does not function as an adhesive. In addition, the water absorption rate of each type of wall tile is not the same, which depends on the experience to grasp.
The varieties and specifications of ceramic tiles are numerous, and the physical and chemical properties of various products are not the same. The effect of choosing different products is also very different. Therefore, in the purchase and use, we must take into account their own actual situation to consider comprehensively, to avoid entering the following consumption mistakes:
Misunderstanding 1: The thicker the tiles, the better
Tiles are not good or bad but they are in their own texture.
Myth 2: Matte bricks are not easy to clean
Most of the glazed layers on the surface of the matt bricks have been specially treated. They are wear-resistant, non-slip, non-absorbent, and easy to clean.
Myth 3: The bigger the specifications of the tiles, the better
The size of the actual space must be taken into consideration when purchasing the tiles. Living room floor tiles also have to consider the size of the actual visual area, refers to the size of the furniture and other places that can be seen by posterity.
Myth 4: Seamless bricks should be stuck without seams
Considering the problem of thermal expansion and contraction of ceramic tiles, seamless wall tiles must be left seams, which should be around 1 to 1.5 mm, or the size of the air nails as a reference.
The tiled tiles make a refreshing shower for the morning and evening. The shower cools off in the cool bathroom space and sets off a schedule for the summer season. Although tiled bathroom walls with tiles are the most common decoration methods, in order to make the bathroom space with a cool and modern bathing effect, we must use small pieces of tiles to collage the seasonal and stylish effects. Create a cool, comfortable feeling!
The use of good waterproof bathroom furniture because of the more spacious feel, the whole bathroom is not partition partition wall dry and wet, and no shower curtain installed in the shower, so to prevent splashing things, be sure to arrange the storage space in the bathing area Where splashes can not be splashed, you can also consider placing storage space on the wall, such as installing stainless steel shelves. In addition, stainless steel legs that are not afraid of water can also be used as a support under the basin, or a bathroom cabinet with good waterproof performance can be used.
Tiles Tiles Space renderings Bathroom Space Cement Decor Stainless steel Living room floor tiles Living room decoration partitions Glass bricks partitions Cabinets Glass furniture Floor tiles Stainless steel Bathroom cabinets Partition doors Glass doors Tiles Specifications Tiles Tiles Acid-resistant tiles
Electric Lawn Mower,Lawn Raker,Electric Lawn Raker
Fenghua Jade Motor Co., Ltd. , http://www.goselectric.com