Tips: What are the specifications of safety shoes in different regions and countries?

Different regional and national safety shoe specifications

1. European Common Market Safety Standards (EN344.1:1992) According to the testing methods and specifications of this standard, safety shoes can be divided into three types:

.EN345.1:1992: Professional safety shoes with built-in steel sheet in the toecap that can prevent impact of 200 joules (J).

.EN346.1:1992:Professional use protective shoes with built-in steel sheet in the toecap to prevent impact force equal to 100 joules (J).

.EN347.1:1992: Professional work shoes, no steel sheet inside the toe cap.

2. American Standard (ANSI-Z41-1991)

According to the resistance of the shoe to compression and impact, there are three kinds of safety shoes with protective toe caps.

3. Australian Standards (AS/NZS 2210.1:1994)

This standard divides safety shoes into 4 types, including: Heavy-duty work safety shoes. Medium-sized work safety shoes. Light work safety shoes. Waterproof safety shoes

4. The People's Republic of China National Standard

.GB4014 a 83 leather safety shoes. GB7054 a 86 rubber surface flood control safety boots

5. Japanese Standards (J1S-T-8015:1983)

National Standards Introduction

First, product safety performance and physical performance standards:

Inspection project implementation standard requirements

Impact resistance test (mm) LD50-94 Anl: impact hammer 23kg, after the height of 900mm impact, the clearance within the shoe ≥ 15

Pressure Resistance Test (mm) LD50-94 Anl: 15KN Footwear Clearance ≥ 15 After Pressure Test

Anti-piercing force (N) GB12017-1989 Special grade: ≥1100 (environmental conditions 18-28°C)

Insulation performance test (6KV) GB12011-2000 Test voltage 6KV, duration 2min,

Leakage current <5 mA

Anti-static performance test (Ω) GB4385-95 Resistance value 105Ω-109Ω

Oil resistance GB16756-97 Resistant to gasoline, kerosene, transformer oil and trimethylpentane solvent,

Expansion ≤12%

High temperature resistance LD4-91 Low heat resistance, heat resistance temperature 150±5°C

Outsole thickness (mm)

Thickness of any place on the sole ≥ 6

Outsole wear (mm)

≤10

Outsole folding (mm)

≤12

Peel strength (N/cm)

≥59

Outsole Hardness (Shao A)

55-72