Wallpaper is now an indispensable material in home improvement. Many netizens may think that sticking wallpaper is as simple as sticky tape. You don't need to ask professionals, you can! In actual fact, today's Xiao Bian wants to teach everyone how to avoid the wallpapering of the wallpaper.
PPG Paper Aesthetics Wallpaper
Dead wrinkles are the defects that affect the effect of wallpaper paste. The reason is that, besides the poor quality of the wallpaper, it is mainly due to the fact that when the wrinkles of the wallpaper are not smooth, they are squeezing and flattening.
The main reason why the wallpaper is flaky is that the base layer is not clean, the viscosity of the adhesive is poor, and the seam is thrown in the sun.
Wallpapers of different materials should be used with the matching wallpaper adhesive, and the wallpaper should be wrapped over an angle of 20 mm or more.
If the wallpaper is turned up, you can rework according to the causes; if the wallpaper is not properly processed at the grassroots level, re-clean the wallpaper base layer and make up the adhesive to stick the wallpaper; if the glue is small, you can replace the sticky adhesive; The edges of wallpapers should be removed and the wallpaper should be re-picked.
The main cause of air bubbles is uneven brushing of glue, which is caused by the fact that bubbles are not driven out when the wallpaper is applied.
During the construction, in order to prevent the part of the glue from leaking, the wallpaper may be scraped once with a scraper to ensure that the wallpaper is evenly brushed.
If the wallpaper finds bubbles in use, you can use a knife to cut the wallpaper, release the air, and then Brush the glue to flatten the wallpaper. You can also use the syringe to draw out the air and inject the glue to flatten the wallpaper.
Wall construction wallpaper home improvement
Multi Wire,Multi Diamond Wire,Multi Wire Saw
Fenghua Jade Motor Co., Ltd. , http://www.nscuttingdisc.com