First, the woven bag cutting machine operating procedures
1. Plug in the 220V power supply, and the power indicator will light red.
2. According to the material and thickness of the plastic bag, adjust the temperature of the heating wire. The knob rotates clockwise to high temperature, counterclockwise to low temperature, and the thicker the plastic bag, the larger the knob turns clockwise.
3. After the temperature of the woven bag cutting machine is normal, press the upper cover once to indicate that the shrinkage is completed.
4. If it is found that the shrinkage can not achieve the effect, then check the power supply, heating wire, high temperature tape, and promptly notify the professional to repair.
5. After the woven bag slitting machine is used, the temperature of the woven bag cutting machine is rotated counterclockwise to the lowest, and the temperature is the lowest. Unplug the power plug, isolate the power supply, and then arrange the power cord.
Second, the operation notes:
1. When handling, the hand should not be placed between the upper cover of the woven bag cutting machine and the heating wire to prevent the hand from being burnt.
2. When adjusting the temperature, do not use excessive force. When stopping the use, the temperature adjustment knob must be rotated counterclockwise to the minimum position.
(http://)
Embossed Aluminum Sheet finish is achieved by processing the natural mill finish material through embossing rollers. This provides a surface, which diffuses light reducing reflectivity and glare. It is used for applications on decorative effects, or to reduce surface reflectivily. As aluminium embossed sheet is both a stable and durable material, it provides excellent service as a roofing or cladding without the need of any protective coating. Aluminiums highly reflective surface will dull to a uniform patina finish with prolonged exposure to the sun, wind and rain bome sand and dirt. Changes in appearance will be consistent along an elevation.
Embossed Aluminum Sheet, after the process of embossing, cutting, oxidation will form the surface with a dense layer of aluminum oxide protective film. And It has obvious below advantages such as acid-corrosion-resistance, long-lasting shine, beautiful patterns, anti-corrosion performance and stability, strong adhesion, impact resistance, non-toxic side effects, safety and environmental protection. Besides, the electro-oxidation can effectively remove residual oil and manual handling of fingerprints.
Embossed aluminium sheet are widely used in refrigerator, solar heat reflectors, decorative aluminum products, lamps, bags, disinfection box, air conditioning, ventilation ducts, indoor & outdoor decoration, machinery and equipment housing and other industries. Embossed finish can enhance the thickness and strength of aluminum.Advantages of Embossed Sheet
Defies dents thanks to improved impact resistance
Resists scratching with reduced surface contact area
Saves you money with increased durability & long life
Save weight thanks to stronger but lighter gauge materials
Eliminate glare & reduce reflections with patterns that dissipate light
More than 20 unique patterns and textures available
Specification 01) Alloy: A1050, A1060, A1070, A1100, A3003, A3105 etc
02) Aluminum thickness: 0.25mm~2.0mm03) Aluminum standard width: 1200mm Max width: 1500mm
The embossed oxidized panel is beautiful, with thickness from 0.25mm to 2.0mm, while the maximum width is 1500mm, after pattern embossed, the thickness could be 0.08 to 0.25mm more. Additionally, we offer processing service for anozdizing aluminum sheet, which could further strength sheet`s ability of anti-corrosion.
Pattern: Rhombic veins, orange peel veins, diamond veins, five-rib veins etc.
Embossed Specular Lighting Sheet
Embossed Specular Lighting Sheet,Reflective Sheet Metal,Light Reflector Board,Embossed Aluminum Sheet
Changzhou Kema Reflector Material Co., Ltd. , http://www.aluminumreflector.com