The Internet of Things "locks" the cable manhole cover

China Telecom is currently making every effort to build a “smart city” in Shanghai and accelerate the deployment of advanced information and communication technologies. New technologies such as IPV6 and Internet of Things will continue to apply Shanghai's urban construction after the Expo. The IoT monitoring cable manhole cover service widely used in the road around the Expo site has successfully protected the safety of the information Expo. It is reported that a number of municipal public facilities units have gone to Shanghai Telecom Technology Development Co., Ltd. to provide further services.

Under the guidance of China Telecom Shanghai Co., Ltd., Shanghai Telecom Technology Development Co., Ltd., in cooperation with the Pudong District Bureau, the Central District Bureau, the Pipeline Company and other related units, will develop the smart cover anti-theft alarm system based on wireless network, combined with the concept of Internet of Things. Try to use new technologies such as IPV6, and make a new show during the Expo to visually reflect the use of new technologies and promote the construction of smart telecommunications and smart cities.

Through the sensor embedded in the cable manhole cover, the status of the manhole cover can be monitored in real time, and the alarm information is sent to the management center through the CDMA2000 network. The new mobile information positioning function is used to describe the trajectory of the manhole cover. The monitoring center is able to understand the incidents in real time and respond instantly.

The application of the Internet of Things technology has provided a new way for the solution of the anti-theft problem of many road covers, which has already attracted the interest of many municipal facilities management departments.

Double Disc Grinding And Polishing Machine

Grinding and polishing are the same mechanical movement, the principle is the same. But for surface quality, the surface finish of polishing is higher than that of grinding. In fact, polishing fluid can be said to be the last process of grinding, grinding and polishing can be realized on the same plane polishing machine at the same time. Grinding is divided into rough grinding, fine grinding, polishing is divided into rough throwing, fine throwing. Most of the time, we have three processes to process the surface quality of products: rough grinding, fine grinding, fine polishing. With these three processes, the workpiece surface flatness, parallelism, roughness is quite high. Some customers do not have such high accuracy requirements, especially roughness requirements are not so high, so they only use the first two processes, or the fine grinding process. Specific to see the quality of the workpiece surface itself, as well as customer requirements to achieve the quality.

Double Disc Grinding And Polishing Machine,Disk Polishing Machine,Bench Grinder Buffing Machine,Bench Polisher And Grinder

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterial.com