figure 1
Each base needs to be machined with four foot holes, but their positions are different.
(2) Drilling structure and working principle This drilling mold is designed in horizontal boring machine. The structure of the base of the base is shown in Figure 2. It is mainly composed of a drill template 9, a multi-port positioning slide 2, a base 4, a drill sleeve 8, a pressure plate 5, a pressing bolt 10 and the like. Among them, the multi-port positioning skateboard 2 is designed with four-size positioning stops, so as to ensure that the plane of the foot can be closely attached to the plane of the drill template, and cut off one side. In order to ensure its correct centering, a guide block 3 is designed at the bottom of the multi-stop positioning slide. A drill sleeve with four sizes of frames is mounted on the drill template 9. The base 4 has a guide groove, and the base 5 is mounted on the trampoline table during processing. In order to ensure the relative position of the base 5 and the drill template 12 and the stability of the drill mold, the connecting arms 8 are mounted on both sides of the drill mold, and are fastened by bolts 9.
Previous page next page
Air-Fluid Push in Fittings are made in nickel Plated Brass Material ,The "AJ" Nickel Plated Brass Series fitting is our "Automatic Push in Fitting line with PT, Parallel & NPT Thread and Metric or Inch Tube Size,ï¿ 02mm-ï¿ 16mm & ï¿ 1/8-ï¿ 1/2 , The sealant on thread available for the buyers` needs.The quick connections and disconnections with calibrated plastic hoses at any time by simple hand release.
The Straight Male /Female Connector , 45 / 90 Deg Swivel Male/Female Elbow Fittings , Union Tee , Branch Tee ,Run Tee , Y Connector , Banjo Elbow Fittings, Speed Controller types available to meet customers` various demands. Push-In Straight 1/4" NPT x 3/8" Tube.Push-In T-Union 3/8, Union Connector Fitting: 3/8" .Male Adapter Fitting 3/8" NPT - 1/4" Tube ,Male Swivel Elbow Fitting 3/8" NPT - 1/4" Tube
China Air-Fluid Manufacturer, Supplier, Exporter, OEM for Pneumatic Fittings, Nickel Plated Brass Push-fit Fittings, Plastic Push In Fittings, One Touch Tubing Fittings, Push-To-Connect Tubing Fittings. Nickel-Plated Brass Push-To-Connect Fittings
Brass Nickel Plated Push In Fittings
Brass Nickel Plated Push In Fittings, BSP Brass Push in Fittings, Metal Push In Fittings, Nickel Plated Brass Fittings, Pneumatic Push In Fittings
Cixi Air-Fluid Pneumatic Components Co.,Ltd , http://www.air-fluidfittings.com