Reader: The wall of the house has a small pothole after the paint is finished, but the wall surface is smoothed and the pit is only after the paint is finished. Is this related to the quality of the paint?
There is no relationship between the small pits on the wall and the paint, mainly caused by the unprocessed wall base. Many owners believe that after painting, all kinds of small pits on the wall can be made up. In fact, even if the primer is completely brushed twice, the thickness of the coating is less than 2 mm, and the thickness is completely insufficient. To make up for covering the small pit.
There are two main reasons for the appearance of small pits on the wall. The last layer of the base layer of the wall is putty. When the putty is unevenly mixed, there will be particles. These particles will fall off during the later grinding, resulting in small pits. In addition, due to the characteristics of the putty itself, gas is generated after stirring with water, so the putty after stirring is allowed to stand for about half an hour, the gas is fully generated, and then the gas is released by stirring. If it is not used after being stirred and used directly, the gas generated will eject a small bubble inside the wall, and after a sanding, a small pit will appear.
For whatever reason, these pits cannot be observed after grinding because there is a lot of sanding dust in it. It only appears after sweeping the wall and brushing the primer for the first time. Therefore, the experienced oil union finds the pit after brushing the primer, then fills the pit with the putty and the primer, and then smoothes it after drying, and then continues to brush the topcoat twice.
As to whether there are small pits on the wall, it is unqualified construction, and the industry has relevant standard specifications. Due to the inevitability of the material and the accuracy of the construction, for ordinary decoration, it is required to stand at a height of 1.5 meters from the wall. If the obvious pit is not visible, if it is a well-decorated house, it needs to stand 1 meter away from the wall. At the head, you can't see the obvious pit as qualified.
[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If Xiaoyanzi, Wu Mei Niang also come to sell paint, what will happen?" Jiuzheng Coating Network Exchange Group]
Our Cordless Drill, Cordless Impact Wrench, Cordless rotary hammer,Cordless Wrench,cordless wrench use A-lithium battery. Some cordless drill and wrench use nickel cadmium battery. The battery is 1500MA capacity. The battery charge time is 30min to one hour.
Cordless
Cordless Drill, Cordless Hammer, Cordless Impact Wrench, Cordless Wrench, High Quality Cordless Impact Wrench
YongKang WALMA Tools CO., LTD. , http://www.walmatools.com