Load selection:
(1) The total power of the load should not exceed the output power of the solar panel or controller.
(2) The load power should be selected according to the capacity of the battery. The basic requirement is that in normal sunshine, the solar energy that can be stored by the battery every day can meet the power consumption of the load for one day or have a surplus.
(3) For the AC load, select an appliance that can use the output waveform characteristics of the inverter. If an appliance that can only use a sine wave is used, an inverter with a sine wave output should be selected.
When installing and using a new home solar photovoltaic system, the following must be observed:
(1) Strictly avoid short circuit of various household appliances and wires, and the installation of solar panel brackets must be firm and stable;
(2) The solar panels must be installed in the correct azimuth and tilt angle to avoid dust pollution and the cabinets avoid water soaking;
(3) When the voltage is indicated in the alert zone below 11V (red zone or hear the alarm sound), indicating that the battery is not fully charged, the switch should be turned off immediately, stop using it, and recharge it to the normal use area (or green zone). Use (except products with automatic control function);
(4) Solar panels or controllers and inverters should not be frequently plugged after they are connected;
(5) The cabinet must not be inclined, and it must not be turned upside down to prevent the electrolyte from overflowing, damaging the equipment or injuring the human body;
(6) The two poles of the battery must not be short-circuited, otherwise the battery will be damaged;
(7) Lamps must be equipped with special high-efficiency energy-saving lamps. Do not use other lamps. Don't touch the lamp electrodes. Do not extend the wires or other electrical wires without authorization. It is better to use the battery fully before use. ;
(8) It is forbidden to connect the DC power supply and the electrical appliance to the AC power supply;
(9) Minors under the age of 16 must not touch or remove.
POLYKEN Visco-elastic anticorrosive tape is a new-type high-performance viscoelastic polyolefin material. It preserves the dual characteristics of the 100% solid adhesive material and liquid adhesive material. In normal conditions, its viscoelastic property will keep above 30 years. This product has excellent viscolastic , water-proof sealant and easy-used characters.
VISCO ELASTIC COATING is a 2-layer system that consists of a corrosion protective inner wrap (VISCOWRP) and mechanical protective outer wrap that can be a PE, PVC or PU composite outer wrap.
Features
Is easy to use and can be applied in almost any situation, including below- and above-grade structures and steel pipelines,elbow pipe, pipe bending, three joints and insulated flange.
Remains flexible even after decades
Adheres to any dry surface, such as concrete, steel, pvc, piping, ducts, etc.
Is easy and safe to use. No primers, solvents or heating are required.
Is the latest viscous elastic coating, with unique features.
100% impervious to moisture and gases.Works as a corrosion / vapor barrier, water stop and encapsulation agent
Is a long-term solution for Soil-to-air transitions, Field joints, High salt and water content,In-ditch applications,Pipeline Renovation Repair
Excellent Self healing
No curing time,Permanent wetting characteristics.
100% inert formulation : no reactive groups and no deterioration in the course of time.
30 years product warranty.
Polyken Visco-Elastic Tape Coating System
Polyken Visco-Elastic Tape Coating System,Visco-Elastic Tape,Visco-Elastic Anti-Corrosion Tape,Pipeline Visco-Elastic Tape
Jining Qiangke Pipe Anticorrosion Materials CO.,Ltd , https://www.pipe-wrap-tape.com