Furniture companies polluting serious pollution standards will be introduced next year

EIA review failed to prohibit the construction of high-energy-consuming enterprises to punish more water and electricity charges to levy volatile organic pollutants and cost-building enterprises to establish a "leading" system for environmental protection. Among the 1,200 polluting enterprises that have been adjusted out of the composition of PM2.5 in this city within four years, a considerable part comes from industrial pollution. In this regard, in the next four years of the Air Action Plan, various departments of the city will jointly limit the development of polluting enterprises, and plan to adjust and withdraw 1,200 polluting enterprises. At the same time, the city will also use economic leverage to adjust the number of polluting enterprises and restrict the development of polluting enterprises. For example, increase the punitive electricity price, the implementation of water prices, and the introduction of volatile organic pollutants. The classification plan may not be approved by the EIA. The city will implement the energy conservation assessment review system. The energy consumption of the new project unit product (output value) must reach the international advanced level. For industrial projects that are prohibited from construction and projects that have not passed the energy conservation assessment and environmental impact assessment review, the relevant departments may not approve, approve, or file the case, may not provide land, may not approve the construction, and may not issue production licenses, safety production licenses, and discharge permits. certificate. Financial institutions may not provide any form of new credit support, and the relevant units may not supply electricity or water. Since the beginning of this year, the implementation of the regional approval policy, the city will implement regional and industry restrictions on areas and industries that have not completed air pollutant emission reduction tasks. Except for people's livelihood projects, projects for the discharge of major atmospheric pollutants may not be approved. The district and county governments resolutely cleaned up, strictly enforced the law, closed the projects of polluting enterprises that were illegally constructed and put into production, and completed the illegal construction and production projects in the high-pollution industries before the end of 2014. High-energy-consuming enterprises plan to punish more water and electricity charges. This year, relevant departments will investigate the electricity consumption and water consumption of high-energy-consuming and high-water-consuming enterprises in the city, and divide the industry and sub-regions to formulate enterprise consumption for water, electricity and other resource products. Quota, research and improve differentiated, step-by-step resource price policy. At the same time, increase the implementation of punitive electricity prices and water prices for enterprises with high energy consumption and high water consumption, and guide enterprises with high energy consumption and high pollution to accelerate adjustment and transformation, and orderly exit. This policy strives to be implemented next year. This year, according to the principle that the cost of sewage is not lower than the cost of pollution control, the charging standards for sulfur dioxide and nitrogen oxides will be adjusted, and the policy of collecting pollutants such as volatile organic compounds will be studied, and the discharge of volatile organic compounds will be introduced next year. Adjust according to environmental protection requirements and changes in pollution control costs. In addition, this year will also conduct research on emissions permit and emissions trading policies. Establishing a “Leading” System for Corporate Environmental Protection In 2014, the city will study and establish a “leadership” system for enterprises, introduce evaluation standards and incentives, and organize implementation. Encourage advanced enterprises with energy efficiency and emission intensity to reach higher standards, give play to demonstration and lead, and promote environmental protection development of the entire industry. The key plan prohibits the construction of high-energy-consumption and high-pollution projects. According to the plan, this year, the city will study and formulate a list of high-pollution industrial projects that are banned from new construction and expansion, and will be released and implemented next year. The list will be updated every two to three years, as needed. In principle, construction of high-energy-consumption and high-pollution projects such as steel, cement, coke, non-ferrous metal smelting, electrolytic aluminum, and flat glass is prohibited, and labor-intensive general manufacturing projects are no longer being built. This year, the city will also formulate a list of high-pollution industry adjustments, production processes and equipment exit guidance that are strictly in line with national requirements and do not conform to the capital's functional positioning. According to the needs, every two to three years will be adjusted and updated to continuously promote the adjustment and exit of the polluting industry and further optimize the industrial structure. In 2014, the national “12th Five-Year Plan” backward production capacity elimination task was completed one year ahead of schedule. From 2015 to 2017, another batch of pollution production capacity will be eliminated. Key pollution source network environmental protection department This year, the city will further improve the pollution source emission list and initially establish a database. In 2016, we basically realized the dynamics of volatile organic compounds and particulate matter emissions. Before the end of next year, the city will also improve the online monitoring system for key pollution sources, install key pollutant emission online monitoring systems as required, and network with environmental protection departments. Fully use supervision monitoring, online monitoring system for pollution sources, investigate and deal with illegal discharges such as excessive discharges according to law, and shut down illegal enterprises that have been stolen and repeatedly investigated and repeatedly investigated. For suspected environmental crimes, criminal responsibility shall be investigated according to law. Appropriate rewards are given to those who report illegal discharges. The sewage discharge standard of the furniture industry will be introduced next year. The city will improve the standard system, further tighten emission restrictions, and clarify the requirements for pollutant discharge limits and unorganized emission control of unit products. In 2013, the emission standards for air pollutants in the cement and waterproof coil industry were formulated. In 2014, we formulated emission standards for air pollutants in packaging and printing, wood furniture manufacturing, and automobile manufacturing, and formulated standards for volatile organic compounds. In 2015, the emission standards for air pollutants in the refining and petrochemical industries were revised. Environmentally illegal corporate loans or denials The city will promote green credit and green securities, incorporate corporate environmental information into the bank's credit information system, strictly limit corporate loans and listing financing for environmentally illegal enterprises, and eliminate the use of resources for comprehensive utilization of value-added tax incentives. Qualifications. [Some industrial pollution control targets] In 2013, Jinhao Group formulated and consolidated the overall transformation of the Beijing cement production capacity transformation plan as required. In 2015, the city's cement production capacity was compressed to 6 million tons. In 2017, the city's cement production capacity was further reduced to about 4 million tons, and the retained capacity was used for co-processing hazardous waste. In 2013, Yanshan Petrochemical Company stopped burning heavy oil, completed the two-tail gas treatment project, and launched a pilot test for leak detection. In 2014, the rubber tail gas treatment project was implemented to complete a round of leak detection and repair. Compared with 2012, the cumulative emission reduction of volatile organic compounds was 20%, and an air quality automatic monitoring station along the mountain area was built and put into operation. In 2015, the technical transformation of desulfurization and sulfur production and the comprehensive treatment of all mailed exhaust gas were completed. Compared with 2012, the cumulative emission reduction of volatile organic compounds was 35%. In 2016, compared with 2012, the cumulative reduction of volatile organic compounds was 50%. In 2017, the concentration of volatile organic compounds in the air in Yanshan decreased by 30% compared with 2012. In 2013, the integration task was completed, and the number of reservations was determined. The concrete mixing station that did not pass the governance integration in the Fifth Ring Road basically withdrew. In 2014, the company formulated and implemented the city's no-procedure, unqualified mixing station closure and demolition plan and the basic withdrawal plan for the in-situ mixing station that did not pass the governance integration. In 2015, the concrete mixing station that did not pass the governance integration in the city was basically withdrawn, and the city's concrete mixing station was controlled at around 135.

PC Rod and Sheet is an amorphous-form, non-toxic, odorless, highly transparent, colorless or slightly yellow thermoplastic engineering plastic, Pc Rod and sheet is known as a transparent metal.

Anheda Plastics is the first domestic manufacturer to produce ultra-thick Pc Plate(with a thickness up to 200mm), filling the gap in this field in China.

Anheda Plastic uses imported equipment and imported raw materials to produce pc rod and sheet. After continuous innovation and improvement, the current Anheda pc profiles have several series of products such as transparent, black, glass fiber, flame retardant, alloy, etc.it Can meet the different performance needs of customers for pc profiles.

 PC Rod and sheet has a rigid holding force in a large temperature range, anti-energy rays, good electrical insulation performance,good dimensional stability, translucent, physiological inertia, and it is suitable to contact with food.

PC Rod and Sheet

Clear Polycarbonate Sheet,Pc Bar Polycarbonate Rod,Transparent Pc Plastic Rod,PC Solid Sheet, polycarbonate plastic sheet, extruded pc sheet

Shenzhen Anheda Plastic Products Co.,Ltd , https://www.ahdplastic.com