The hotel LED display has three installation methods, namely: wall-hanging, lifting and inlaying. The following describes the environment suitable for the three installation methods and the installation steps.
Wall-mounted environment: The wall must have sufficient load-bearing capacity, and easy to use expansion bolts, ordinary bolts or easy-to-weld wall surfaces (such as steel structure wall), in order to facilitate the fixed LED display on the wall Screen pendants.
Wall-mounted installation steps:
1. Before installation, it is necessary to understand whether the wall has sufficient load-bearing capacity to fix the display;
2. After determining that the wall has sufficient load-bearing capacity, perform actual measurement according to the customer's actual requirements (installation position, installation height, and right-to-left distance), make a detailed record, and make a scale and scale on the wall. , must be clearly marked to better carry out the next step;
3. Determine the number of pendants to be used according to the height of the LED display, and make a mark;
4. Fix the display pendants on both ends. And use a horizontal tube to determine that the two pendants are on the same plane. After fixing the hanging pieces at both ends, the Other hanging pieces are installed as the standard of the two hanging pieces;
5. After hanging the display on the mounted pendant, securely connect the display frame and the pendant with screws;
6. Inspection: The display should be installed horizontally, with two levels not exceeding 5.
Lifting adaptation environment: Indoor LED display with no wall surface, no fixed points available, but with sufficient load-bearing capacity for roof installation steps:
1. Before installation, it is necessary to understand whether the roof or other solid roof has sufficient bearing capacity to fix the LED display screen;
2. After determining that the roof or other solid roof has sufficient load-bearing capacity, actual measurement shall be made according to the actual requirements of the customer (installation position), detailed records shall be made, and scales and scales shall be prepared on the roof or other fixed roof. To be clearly marked, to better carry out the next step;
3. According to the height of the display screen to determine the number of pendants to use, and do a good job marking;
4. First fix the hanging display on both ends of the display. And measured with a pull cable. After fixing the hanging pieces at both ends, these two lifting pendants are used as the standard to install other middle lifting hanging pieces;
5. After the display is hung on the mounted pendant, use a screw to connect the LED display frame to the pendant.
6. Testing: The display should be mounted horizontally, with two levels not exceeding 5
Third, the mosaic inlaid suitable environment: need to install the installation of the display panel mosaic:
1.Before installation, you must know the finished product size of the display, and then do the size of the inlaid place. The size of the display product shall prevail.
2. Put the whole display into the place to be inlaid. 3. Fix the display frame and firmly connect the display frame and the surrounding connections with screws 4. Check that the display is to be flat, with the flat surface around the frame and the outside surface of the inlay. The distance must be the same. Error shall not exceed 5/Shenzhen LED base (WeChat public number: Shenzhen LED base)
crowd control barrier,High Quality crowd control barrier,crowd control barrier Details
Hebei Giant Metal Technology Co., Ltd. , https://www.wiremesh.pl