The faucet maintenance six methods to keep the light as new is not difficult

After purchasing a bathroom faucet, how to use and maintain it properly is a headache and headache for many users. In fact, as long as the installation, use, and maintenance are correct, the actual service life of the faucet can last for a long time, and it can always be as bright as new.

1. Please have experienced and qualified professionals to carry out construction and installation. When installing, the faucet should try not to bump with the hard object, do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. Be careful to remove the debris from the pipe and install the faucet.

2. In the case that the water pressure is not lower than 0.02mpa (ie 0.2kgf/cm2), after using for a period of time, if the water output is found to decrease, or even the water heater is turned off, it can be lightly at the outlet of the faucet. Lightly unscrew the screen cover to remove impurities, which can generally be restored.

3, switch faucet should not use too much force, gently turn around. Even a traditional faucet does not require a lot of effort to screw it. In particular, do not use the handle as an armrest to support or use it.

4. The shower head metal hose of the bathtub faucet should be kept in a natural stretch state. Do not coil it on the faucet when not in use. At the same time, when using or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damaging the hose.

5, the ideal cleaning technique is to rinse the faucet with water, and then use soft cotton cloth to dry all the moisture on the metal surface of the faucet, because the water will volatilize on the metal surface. Wipe gently and do not rub hard. Dry with a damp sponge and soft leather to make the faucet shine.

6. It is best to use a mild liquid glass cleaner, or an acid-free, non-abrasive soft liquid and a completely dissolved powder. The non-abrasive solution polish removes the thick mask and deposits on the faucet. Do not use any A friction cleaner, cloth or paper cloth, and any acid-containing cleaners, polishing abrasives, or harsh cleaners.

Global hardware network

Concerned about surprises

Label: faucet maintenance six ways to keep the light as new is not difficult

Previous: How to clean the bathroom hardware pendants? Next: The lock should be lubricated and the lock core is best to put lead powder

We can produce the Boiler Pipe accordng to the EN10216 standard, such as the 10CrMo5-5 steel pipe, 10CrMo9-10 steel pipe, 13CrMo4-5 steel pipe, 15NiCuMoNb5-6-4 steel pipe, X10CrMoVNb9-1 steel pipe and X10CrWMoVNb9-2 steel pipe. Yangzhou Chengde have been sold about 700000 MT boiler pipe to the world in recent 10 years and we share the 70% of export boiler pipe in china.

At Chengde, we take quality seriously. This philosophy carries through every aspect of our operation. That is why we maintain a fully documented/fully certified Quality Management System which complies with the requirements of ISO 9001. This quality system encompasses every phase of our business. Chengde has established its complete quality system as per ISO 9001 since 2006 and upgrade to ISO9001 :2008 at a later stage. 

Our commitment to the highest industry standards in customer satisfaction remains our primary purpose with an emphasis on continual improvement in both production quality and support service. Chengde rises above the competition in delivering to you a quality/fully certified product on schedule.
In the year of 2015, we win the first prize of National Science and Technology Progress Award by the program of [The innovative research & development, and application of steel pipes used in 600 ℃ Ultra-super critical coal power generation unit".EN10216 Boiler Steel Pipe

EN 10216 Boiler Pipe

Boiler Tube,En10216 Boiler Pipe,10Crmo5 5 Pipe,15Nicumonb5 6 4 Pipe