For the driving of the driver's driving cam controller, the transformation only needs to add a switch cabinet and the corresponding contacts provided by the remote controller in parallel with the contacts of the original cam controller or the linkage platform. The rotor resistance cutting device for the motor can be This is accomplished by a corresponding contact controlled contactor provided by an industrial wireless remote control.
After the remote controller is installed, the operation can be performed by one person alone, which saves manpower resources. Since the operator performs the command operation on the ground and independently judges the running status of the vehicle, the accuracy and coherence of the operation control are greatly improved than before; The operator can select the best angle to avoid the more dangerous operating positions such as poor visibility or serious pollution or high temperature, thus improving the operator's operation and control environment.
U Bend Tubes for boiler & heat exchanger
'U' Bend Stainless Steel Tubes are manufactured in our plant as per the customer requirements. Bends can be Heat Treated in accordance with Clients` requirements followed by hydrostatic testing and dye penetrant testing if required.
'U' bent tubes are widely used in heat-exchanger systems. Heat exchanger equipment on the basis of stainless U-tube is essential in strategically important and critical fields nuclear and petrochemical machine building.
U-tube heat exchangers Designed for high temperature applications, especially steam condensing or hot oil systems. Thïs model is selected when differential expansion makes a fixed tube sheet exchanger unsuitable and when conditions preclude a floating head type (HPF) selection.
Surface condition Finished U-tubes shall be free of scale, without scratches after bending
U Bend Heat Exchanger Tube,U Bend Stainless Steel Tube,U Bend Stainless Steel Pipe
YUHONG GROUP CO.,LIMITED , https://www.alloypipeline.com