1. Make sure that the construction surface is flat and clean. After the reference line is applied, apply cement or adhesive on the construction surface.
2. Paste the mosaics in order, leaving appropriate gaps between each sheet. Each time a sheet is placed, the mosaic is flattened with a wooden strip to ensure that each is compacted and fully bonded to the adhesive.
3. Tear the paper every other day or after the adhesive is dry. Wet the sticker with sponge water and wait until the sticker is completely wet before tearing the paper.
4, caulking. Use a tool to fill the gap with the grout or the original primer, white cement, etc.
5. Cleaning. Clean the excess sealant attached to the mosaic with a damp sponge and wipe it with a dry cloth to complete the construction procedure.
Note: The mosaic connected by the plastic net is applied to the cemented construction surface during construction, and step 3 can be omitted.
Corrugated Sheets,Steel Manufacturer,Color Coated Steel Sheet
Prepainted Coil Co., Ltd. , http://www.sdhfgroup.com