Smooth bearing

Source: China Bearing Network Time: 2014-06-25

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The intention of the bearing is smooth:
The smooth intention of the rolling bearing is to reduce the internal conflict and wear of the bearing; to avoid burning, its smoothing effect is as follows.
.1), reduce conflict and wear and tear.
The ferrules, the tumbler and the holder that make up the bearing touch each other; avoid metal touch; reduce conflict and wear.
.2), extended fatigue life.
The tumbling fatigue life of the bearing; in the rotation; the rolling touch surface is smooth and outstanding; then extending. Conversely; the oil viscosity is low; the smooth oil film thickness is not good;
.3), discharge conflict heat, cooling.
Circulating oil supply method can discharge heat caused by conflicts with oil; or heat from outside; cooling. Avoid bearing overheating; avoid aging of smooth oil itself.
.4), other also to prevent foreign matter from invading the inside of the bearing; or to avoid rust and corrosion.
Smooth method:
The smooth method of the bearing; it is divided into smooth grease and smooth oil. In order to make the bearing perform well, first; to choose the appropriate application conditions, the application of the smooth method. If only thinking smooth; oil smooth smoothness is dominant. The grease is smooth and has the expertise to simplify the layout around the bearing; it compares the smoothness of the grease with the smoothness of the oil.

Recommend to friends comments close window

Bearing related knowledge

Analysis of the skill of thermal spraying technology in the production of sliding bearings: anti-rust processing technology for imported bearings
NSK bearing device cooperation method five primary fault rules for sliding bearings
SKF bearing division

This article links to http://
Please indicate the bearing network http://

Previous:Iki bearings' oscillating wear and temperature effects and their countermeasures Next: Why the bearings will be damaged early

Pull Rivet Nuts , pull cap, instant pull cap, the fastening field, currently widely used in automobile, aviation, instrument, furniture, decoration and other electrical and light industrial products on the assembly. In order to solve the defects of metal thin plate and thin pipe welding nut, such as easy melting, easy sliding tooth of tapping internal thread and so on, it does not need tapping internal thread, does not need welding nut, riveting firm efficiency is high, easy to use.
Type editor
Small hexagon Stainless Steel Rivet Nut with through hole and small hexagon stainless steel Rivet Nut with blind hole.
Use the editor
If the nut of a product needs to be installed on the outside, and the internal space is too small to allow the pressure head of the riveter to enter the process of riveting and the sprouting method can not meet the strength requirements
Pull rivet nut
Pull rivet nut
Wait, at this time pressure riveting and full riveting are not feasible. Must be riveted with a pull. Applicable to the fastening field of all thickness plates and pipes (0.5mm-6mm). Use pneumatic or hand pull riveting gun can be riveted once, convenient and firm; Replace the traditional welding nut, make up for the lack of metal sheet, thin tube welding melting, welding nut not good.

Hebei Xinyu Metal Products Co.,Ltd is a ISO9001-2008 cerificated enterprise,which specialize in manufacturing and exporting Furniture Nuts .Product including Wing Nuts , Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.

Flat Head Rivet Nut Round Head Rivet Nut

Pull Rivet Nuts

Rivet Nut,Pull Rivet Nuts,Carbon Steel Rivet Nut,Stainless Steel Rivet Nut,Rivet Nut For Wood,Wooden Furniture Rivet Nut,Flat Head Rivet Nut,Round head Rivet Nut

Hebei Xinyu Metal Products Co.,Ltd , https://www.t-nuts.net