1. The inspection platform generally has high safety requirements. There are many high-altitude service inspection platforms. In order to prevent the risk of the platform steel grating falling, the installation of the steel grating is fixed by welding as much as possible.
2. In order to effectively slip, you must use twisted steel as a crossbar, or use a composite steel grating.
3. The steel grating is installed according to the steel structural flat member. After installation, it cannot be moved laterally or separated from the supporting frame. The supporting length of the steel grating in the direction of the flat steel on both sides of the supporting frame shall not be less than 25mm.
4. Requires movable and detachable platform steel gratings that must be secured with special steel grating mounting fixtures to prevent any displacement of the steel grating.
5. The installation clamp can be supplied by the manufacturer according to the requirements of the purchaser. In addition to the installation clamp made of stainless steel, the Q235 low carbon steel production and installation clamp must be hot-dip galvanized. It is recommended to install the clamp bolt by hot-dip galvanizing surface treatment, bolt The diameter shall not be less than 8mm, and the number of steel grating installations shall not be less than 4 for each steel grating.
6. Regularly check the tightness of the steel grating to identify any corrosion, any dangerous looseness or changes in the position of the mounting clip and handle it on the spot.
Concerned about surprises
Label: platform steel grating
Previous: Key isolation sensor for anti-stealing of smart meter in hardware enterprise Next: (é’ª(Sc)) Origin and use of rare earth element name
Pvc Wood Flooring,Anti Static Roll,Wood Grain Vinyl Flooring,Pvc Plank Flooring
JIANGSU HUAJING FLOOR TECHNOLOGY CO.,LTD , https://www.huajing-floor.com