The maintenance of laminate flooring is relatively simple, which is also the greatest advantage of reinforced wood flooring compared to solid wood flooring. Usually only need to wipe with a semi-dry mop. However, care should be taken to avoid damage to the floor due to moisture and excessively sharp and hot items.
Special stains can be cleaned immediately with a mild detergent or warm water. Never use plenty of water to clean the floor. Do not need waxing and painting, avoid sanding and polishing. Because the laminate flooring is different from the solid wood flooring, its surface is relatively smooth and its brightness is relatively good. Waxing can add more polish.
Pay attention to small details in your daily life. Don't throw matches and cigarettes on the floor. Once burned, the floor will seriously affect the appearance and be troublesome to repair.
Avoid sharp objects such as scissors and knives to scratch the surface of the floor; do not drag on chairs and tables while moving furniture; place a mattress on the door to prevent gravel or other small stones from damaging the floor.
Avoid objects that contain gels falling on the floor, such as chewing gum, otherwise it is difficult to clean; at the door of the bathroom and the kitchen should always pay attention to clean up the seepage of water. In northern areas, due to the relatively dry climate, the floor is prone to cracks and cracks. Therefore, when the climate is dry, it is necessary to pay attention to properly increase the humidity of the floor surface. There are conditions that can use a special humidifier to increase the surface humidity; you can also use a cotton swab to wring out the floor and wipe it.
Floor Accessories Furniture Humidifier Paint Kitchen Doors Bathroom Doors
Silicon Carbide particle size sand.
It is also known as silicon carbide sand,generally divided into mesh grade sand from 8#-320#,the greater the number is,the smaller particle size it is.
The size over 320# generally referred as the silicon carbide micro powder.Silicon carbide particle size of sand is dvided into green and black.
It is the ideal for abrasive material,mainly used in polishing and grinding wheel,cutting slices,and etc sectors in abrasive industry.
Silicon Carbides Sand Of Particle Size
Silicon Carbides Sand Of Particle Size,Silicon Carbide Grinding Wheel,Silicon Carbide Grit
NINGXIA PANSON COAL AND CARBON CO., LTD , http://www.nxpanson.com