Reasons for the Weak Power of Laser Markers and Analysis of Adjustment Measures

In our daily use, we will encounter the problem of insufficient power output of the laser marking machine. What are the reasons for this? The following is a detailed explanation for everyone by the technical staff of the Siobe Laser. If it is the kind of laser marking machine that has just been shipped, it depends on whether the power set at the factory is already too small, whether its full-diaphragm is leaky and whether its resonant cavity adjustment has been achieved. Factory indicators, if these conditions occur, then this laser marking machine does not meet the factory standards, and can require manufacturers to exchange. And if those who have used a long time laser marking machine output power problem is not enough, it depends on the first anti-diaphragm is not dirty, if any, we must wipe clean; second look at the resonant cavity Change, if there is to be a micro-tuning cavity, so that the output light spot to achieve the best; third look at the difference between the temperature of the cooling water tank and the ambient temperature there is not more than 5 degrees, more than it must be controlled within 5 degrees; fourth to see Lamp brightness is not enough, is not the end of life needs to be replaced; the fifth is to see if the location of the sound and light crystals and the original settings are different, if there is need to adjust in time. Therefore, if you encounter this kind of problem when using a laser marking machine, you can quickly find a solution as long as we can eliminate it as described above.

       The fire hose is made of polyester staple and filaments or 100% polyester filaments.   The lining can be made of natural rubber, synthetic rubber, pvc or pu . The jacket can be color, polyurethane coated jacket or dyed colored jacket (colors can be orange,yellow,blue and red). The hose resists abrasion. It has bright  color, which makesit easy to distinguish. It is mainly used in fire-fighting and shipyards.Normally it can be used under -20 to 80 degree, also can be used under high temperature until 150 degree. So it can be used in any special and complicated environment, especially for oil field and chemical industry. We can supply the 

hose according to BS6391 standard. The related coupling is usually John Morris Coupling, France Style coupling, etc.



Fire Hose

Fire Hose,PVC Lining Fire Hose,Rubber Lining Fire Hose,Firefighting Hose,PU Lining Fire Hose,Canvas Fire Hose

Hebei Jiuxing Rubber&Plastic Product Co., Ltd. , http://www.jxrubberhose.com