What are the common problems in the yin and yang angle?

1, yin and yang straight processing. Respond to the internal corner line with plaster to find straight. Yang angle straight with a ruler. 2, Yang angle anti-collision, bump treatment. Consider making small rounded corners. Make dark corners with cement mortar. Or use metal bandages as a protective horn. 3, yin and yang corner to ensure that the Founder: Many of the wall of the Yin angle is a lot worse, bombing a straight line to find the fill, then the wall may have to find a very thick, and find too thick is easy to produce empty drums, shedding and other issues, and find fill the back wall The overcast angle of the face will no longer be 90 degrees, but not looking straight is very troublesome. The more scientific approach is to check the inside corner. If there are many mistakes, then there must be a high place. First knock down the high place and then hit the straight line. The inside corner is basically 90 degrees. Also straightened. 4, Yin corner brushing flowers: Because Yin Yin corner paint in the final, sometimes less tone paint, not enough to brush the internal corner, and then adjust the paint, it causes color. Or because the shade of the paint is too much water, there is a color difference with the large surface of the wall. There are many situations where the top surface is painted white and the walls are of other colors, where the color meets is rough. In particular, the color of a wall is different from the color of other walls. The inside corners must pay special attention.

Decoration construction knowledge three trees paint cement

Galvanized Steel Sheet/Plate/Coil

Galvanized Steel Sheet,Galvanized Steel Plate,Galvanized Steel Coil

Wanlei Steel Pipe Co., Ltd. , http://www.tjsteelpipes.com