Introduction: Although some people are aware of the various benefits of the active partition, they can always be tangled in the price, so to save money, in the hotel renovation, let the scene join the woodworking, in the market to buy wardrobe rails and hanging round, the surface to see There is indeed a lot left to open. However, in practice, this is a very wrong choice. If you use less than 2 months, you will surely regret it. It will not be a little bit of money to solve it if you do not reform it.
What issues do we need to pay attention to before the hotel is cut off from the renovation? Here we take the partition of Kecheng Building Material Industry Co., Ltd. as an example to illustrate:
1. The screen must be framed by professional aluminum alloy splicing. It is definitely not a woodworking wood saw that can be made. Its solid performance and impact resistance must be far beyond ordinary wooden frame materials. The door has a built-in transmission rod. With the principle of the jack, the transmission device can easily lock the partition door. The fixed partition screen is as solid as the solid wall. It is only necessary to embed hidden slides on the ceiling and no need to lay the chute on the ground. The screen can meet these requirements.
2. The slide and smoothness of the slide rails and hanging wheels of the movable partition wall and the bearing capacity are stronger than those of the wardrobe slide rails. Ordinary closet hanging system will be difficult to use in less than a month to slide, difficult to push the door, drag the floor and so on. However, it can be formed into an activity partition after many years of experience. It can effectively solve the various problems that exist in ordinary wardrobe hanging systems.
3, mobile partition wall built-in noise treatment and transmission rod design, the minimum sound insulation effect of up to 40 decibels or more, and woodworking do splicing plate, there is no sound insulation effect.
4. The mobile screen has sealing strips and rubber strips on the upper and lower sides, and a tight combination of the concave and convex structures. The barriers are better to block the space, opaque to light and not deformed. The screens that can be formed have these characteristics.
Source: Guangzhou Kecheng Building Material Industry Co., Ltd.
Nickel-based alloy wire owns good resistance to high reactive gases, caustic resistance medium and acid corrosion performance, and also owns high strength, good capability of shaping, hot and cold forming and welding deformation. Therefore it is widely used in petroleum chemical industry, metallurgy, atomic energy, ocean development, aviation, aerospace to solve the problem that general industry, stainless steel and other metals, non-metallic materials engineering corrosion problems could not be solved,it is a very important kind of corrosion resistant metal materials. Nickel based alloys are nickel based alloys that contain alloy elements and which can be resistant to corrosion in a number of media. To classify the chemical composition characteristics, mainly nickel, nickel copper alloy, nickel alloy, nickel chromium molybdenum (Nie Mutie) (iron nickel alloy), nickel chromium molybdenum (including Ni Cr Mo alloy and Ni Cr Mo Cu alloy) and nickel iron chromium (both iron nickel alloy) and other types of. Pure nickel welding wire ERNi-1 for welding of 200, 201 nickel alloy and nickel plated steel plate; steel and nickel dissimilar materials welding; steel surface surfacing.
Nickel Alloy Welding Wire\Welding Consumables
Nickel Alloy Welding Wire,Welding Consumables,Alloy C276 Materials,Inconel 600 Welding
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com