Seamless wall covering, you must know the construction method!

Seamless wall covering is a new wall decoration material that has emerged in recent years. Because of its simple sticking, rich pattern, strong three-dimensional effect, excellent decorative effect, it also has the advantages of waterproof, dustproof and oil-proof. The most important thing is that the price is also affordable, which is deeply loved and favored by the public. Today, the decoration home decoration network Xiaobian introduces the construction method of seamless wall covering for everyone, hoping to help everyone!


无缝墙布


Seamless wall covering wall requirements:

1. Proportionally mix white cement and old powder to make putty evenly paint the wall surface, so that the wall surface can reach the requirements of flatness and firmness.

2, the wall surface can not have empty drum, blistering, cracking, staining phenomenon, the corner line is vertical or horizontal.

3, then brush a layer of base film on the wall, the corners of the wall should be brushed in place.

   Seamless wall covering construction method:

1. Measure the size of the wall surface, check whether the wall surface meets the standard of wall covering, and whether the wall surface is loose or not.

2. If the wall meets the standard, apply a layer of wallpaper glue to the wall.

3, two or more people together to hang the wall cloth first on the top of the wall, one person presses one side, from top to bottom, from left to right, slowly spread the wall cloth. Until the entire wall is completely covered, gently press the wall covering to make it tight.

4, the location of the door, window or switch, you should use a knife to cut off the wall covering, do not rush when cutting, slowly, so as not to cut the wall cloth.

5, the treatment of the corner must be delicate and beautiful.

6. Use a large scraper to compact the entire wall covering. The tighter the better, so as not to fall off.

7. Brush a little glass glue on the corner of the wall.


无缝墙布施工方法


8. Check again whether the seamless wall covering is flat and flat. If there is air bubble or empty drum, it should be ironed with iron. The iron can't be dry and needs steam.

9. Wipe off the excess glue on the corner of the corner with a clean rag and a little water.

10. After the construction is completed, it is clean and hygienic.

The above is the relevant knowledge of the seamless wall covering introduced by the decoration home decoration network Xiaobian. I believe you should have a good understanding of the construction method of seamless wall covering after reading. Although the seamless wall covering is cloth, it is not so easy to break, but it is necessary to pay attention to the construction method during construction. If you want to know more about it, please continue to pay attention to our decoration encyclopedia!

Volleyball Plastic Grass

Volleyball Plastic Grass, Volleyball Grass, China Volleyball Plastic Grass

JIANGSU WMGRASS CO., LTD. , https://www.wmgrassturf.com