Wall clothing is a new kind of wall decoration material, which can make the wall surface have very good air permeability. When the air is wet, it can absorb moisture. When the air is dry, it can balance the indoor humidity and eliminate indoor static electricity. The surface of the three-dimensional fiber makes it harder for the dust to fall than the smooth wall. The following small series describes how the wall coat is constructed and the characteristics of the wall coat.
How to install wall clothing
First, the construction points
1. The construction method of this product is roller coating construction. Roller coating tools used must be special roller brushes. Using other tools, it will be difficult to achieve the desired effect of this product.
2. The construction of this product should be the last link of the entire renovation process. After the doors, windows, floors, corner lines, air conditioning duct holes, electrical switches, and sockets are all completed, this product can only be constructed.
Second, the preparation
1. Pour the product inside the package into a clean, large enough plastic container.
2, according to the instructions on the packaging bag, add the appropriate amount of warm water (water temperature at 20 °C -40 °C is appropriate), and stir evenly.
3. Please use clean tap water to avoid contamination.
4. The mixed product should be allowed to stand for 1 hour before use. Using it in advance will reduce the adhesive strength and the fluidity of the product.
Third, roller coating
1. Put the mixture on the wall with a hand or a plastic spatula, wipe it off, and then use a special roller brush roller (approx. 1-2 mm thick).
After drying out, it was found that there were uneven or bare walls, sprayed with warm water, and then made up a good blend of products.
For the tiny wall surface exposed, after spraying wet with warm water, the roller can be directly used to make up for the bare skin without the need to replenish new materials.
2. When roller coating is applied for the last time, the direction of the roller brush must be the same. The disordered roller coating will make the texture of the product appear cluttered. Under the effect of light refraction, the overall color of the wall surface will be uneven. Visual effect.
3. For the internal and external corners of the wall, you can use a plastic scraper with a putty to apply the coating, then roll it gently with a roller brush.
Wall clothing features
1, no harmful volatile chemical composition, superior environmental performance
The choice of wood fiber and natural fiber plus the production of scientific technology, remove harmful chemicals, fully guarantee the health and safety of human body.
2, no cracking, no shedding
The fibrous tissue has a flexible, breathable function that makes it seamless with the wall surface
3, personalized color, three-dimensional relief arbitrary choice of a change in the traditional paint flat effect, relief texture texture, soft affinity
4. Convenient construction without pollution The method is simple, one-time molding, no wall polishing, effectively avoid dust, noise and spilled
5, repair simple
For the decontaminated wall clothing, the shovel will be soaked, and the new material will be used to scrape off part of the roller and coat it again. It can be integrated with the original wall clothing without seams and traces.
6, easy to update
As long as the original wall surface is clean, smooth, and the bottom surface is white, with good waterproofness, the construction of the wall clothing can be performed directly, and the decoration can be updated without any special treatment.
7, plant characteristics of breathing, adjust the indoor humidity and temperature
The unique permeability of the fibrous tissue allows the wall clothing to have a respiratory function, balance the absorption of moisture in the air in time, automatically adjust the humidity, cold and not condensation.
8, natural sound-absorbing
After the wall coverings dry, the three-dimensional surface of uneven relief is conducive to sound diffusion, weakening the sound of the wall penetration, limit sound reflection, no echo, to provide people with a more peaceful life and work space.
Editor's summary: The characteristics of how wall coverings are used in construction and wall coverings are introduced here. I hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.
Wall wardrobe wall clothing how to construction
Pentaerythritol is mainly used in the coatings industry, can be used to manufacture alkyd resin coating, can make the coating film hardness, luster and durability.It also USES up with anger paint, lacquer and printing ink of pine resin needed raw materials, coating and drying oil, smoldering sex and aviation lubricating oil and so on.
Also used in medicine, pesticide and so on production.Pentaerythritol molecules containing four hydroxymethyl equivalent, with high symmetry, so the production raw material is often used as multifunctional compound
By its nitrification can produce pentaerythritol tetranitrate (taian, PETN), is a kind of high explosives;Esterification available pentaerythritol three acrylate (PETA), used as a coating.
Pentaerythritol
Pentaerythritol,Pentaerythritol 115-77-5,Pentaerythritol Msds,98% Pentaerythritol
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com