What issues should I pay attention to when preventing corn from falling?

What should be paid attention to when preventing corn from lodging:
Prevent corn from lodging and deepen the tillage layer: Deep tillage can promote the development of corn roots and deepen the soil, which can significantly reduce the degree of lodging in the later period.
Prevent corn lodging and timely cultivating and cultivating soil: After corn jointing, the soil can produce a large number of supporting roots, which makes the root system developed and reduces lodging.
Reasonable fertilizer management to prevent corn lodging: Fertilization should be based on base fertilizer, and topdressing should not be too much or too early. Fertilizer should pay attention to phosphorus and potassium fertilizer. Seedling stage seedlings can shorten the upper part of the internode and the roots are deep into the soil. After the jointing, the amount of irrigation should not be too large to prevent the length of the person.
Prevention of corn lodging and reasonable close planting: rationally close planting according to variety characteristics or adopting wide and narrow row planting methods to improve individual development and reduce lodging.

Total 1 | <First <Prev 1 Next> Last> |
share to:

Alnico (AlNiCo) is the first developed a permanent magnet is made of aluminum, nickel, cobalt, iron and other trace metals composition of an alloy.According to different production process is divided into sintered Alnico (Sintered AlNiCo), and cast aluminum nickel and cobalt (Cast AlNiCo).Product shape of the round and square. Sintered products limited to the small size, their production out of rough tolerance is better than the rough cast product can be better workability.

Alnico alloys can be magnetised to produce strong magnetic fields and have a high coercivity (resistance to demagnetization), thus making strong permanent magnets. Of the more commonly available magnets, only rare-earth magnets such as neodymium and samarium-cobalt are stronger. Alnico Magnets produce magnetic field strength at their poles as high as 1500 gausses (0.15 teslas), or about 3000 times the strength of Earth's magnetic field. Some brands of alnico are isotropic and can be efficiently magnetized in any direction. Other types, such as Alnico 5 and alnico 8, are anisotropic, with each having a preferred direction of magnetization, or orientation. Anisotropic alloys generally have greater magnetic capacity in a preferred orientation than isotropic types. Alnico's remanence (Br) may exceed 12,000 G (1.2 T), its coercivity (Hc) can be up to 1000 oersteds (80 kA/m), its energy product ((BH)max) can be up to 5.5 MG·Oe (44 T·A/m). This means that alnico can produce a strong magnetic flux in closed magnetic circuits, but has relatively small resistance against demagnetization. The field strength at the poles of any permanent magnet depends very much on the shape and is usually well below the remanence strength of the material.

Alnico alloys have some of the highest Curie temperatures of any magnetic material, around 800 °C (1,470 °F), although the maximal working temperature is normally limited to around 538 °C (1,000 °F).[4] They are the only magnets that have useful magnetism even when heated red-hot.[5] This property, as well as its brittleness and high melting point, is the result of the strong tendency toward order due to intermetallic bonding between aluminium and other constituents. They are also one of the most stable magnets if they are handled properly. Alnico magnets are electrically conductive, unlike ceramic magnets.

Alnico magnets are widely used in industrial and consumer applications where strong permanent magnets are needed; examples are electric motors, electric guitar pickups, microphones, sensors, loudspeakers, magnetron tubes, and cow magnets. In many applications they are being superseded by rare-earth magnets, whose stronger fields (Br) and larger energy products (BHmax) allow smaller-size magnets to be used for a given application.

Alnico Magnet

Alnico Magnet,Alnico Magnets,Alnico V Magnets,Alnico Rod Magnets,Alnico 3,Alnico 5

Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com