Flooring plays a very important role in the quality of life of future owners. “Once the floor is not neat and empty, it not only affects the appearance but also affects the comfort of the floor.†So the floor should be adequate for the owners. Pay attention. How is the floor covered ? What are the stress on the floor? Following Xiaobian look at it.
How to lay the floor
1, inspection floor (color, quality, type, with or without damage)
2. Cleaning at the installation site, role: make the installation site reach the requirement of paving (ground must be leveled in advance, clean, and dry enough)
3, paving mats, role: moisture, so that the floor feel particularly comfortable, but also can play a buffer effect.
4, the next step is to start the trial floor. In the paving process of the floor, part of the floor is to be cut. North American Maple has pioneered a dust-free cutting technology in the industry. Using a dust-free cutting saw, it will not cause secondary pollution to the interior, and is clean and environmentally friendly.
5, try to lay out the floor, first try to shop 3 ~ 5m2, so that XD people generally look at the overall effect, if you think there is no problem you can start the formal shop floor.
6. After all floors are laid, observe whether the floor is flat at multiple angles, whether there is gaps in the interface, etc., step on whether there is sound, and if there is no problem with the overall appearance, install the skirting board.
What are the stresses on the floor?
1, paving time is exquisite
Whether it is a solid wood floor, a laminate wood floor, or a composite wood floor, wood has a relatively high temperature and humidity requirement.
The temperature and humidity in the spring and autumn seasons are relatively suitable. In summer, the temperature is relatively high. After the floor is laid, autumn and winter are prone to deformation and cracking due to physical factors such as thermal expansion and contraction. In winter, the temperature is low and the floor is relatively dry. In spring and summer, the expansion drum is caused by moisture absorption. From.
In addition to seasonal factors, the temperature of the floor covering should be maintained between 16°C and 30°C. This temperature can keep the wood in a natural state. It is better to avoid the noon and night during the construction time. Try to keep the temperature at 2 o'clock in the afternoon. Humidity is the most suitable day.
2, decoration steps should be reasonable
The paving of the floor is generally performed after the completion of the wall surface, carpentry, and oilworker processes, so as to avoid damage to the floor during construction of other projects.
Before laying the floor, we must do a good job of clean-up the ground, remove the cement and putty on the ground, ensure that the ground is flat, and ensure that the ground does not have sand particles remaining after the damp-proof measures, you can begin to lay the floor.
3, moisture measures to do enough
The waterproof and dampproof measures before laying the floor must be completed, and the space close to the kitchen and bathroom should pay more attention. Waterproof material should be painted evenly. If there is a gap, use cement to make up. Near the water pipe, apply a 30cm high waterproof material.
In addition to the waterproof material, a layer of waterproof paper can also be laid under the floor, with a baseboard near the wall.
4, floor paving to be painted
After the floor is laid out, the floor should be painted with a layer of floor paint and waxed and polished from time to time. Because the floor is often worn, brushing the floor paint and polishing and waxing will help protect the floor, prolong the service life of the floor, and it will be more convenient to clean.
Editor's summary: The above is the relevant content of how the floor shop , I hope to help you, more decoration information, all in this site, so stay tuned.
Flooring
Food Grade Hose,Food Grade Hose Pipe,Food Grade Pvc Tubing,High Temp Food Grade Hose
Changxing VACUFLEX Hose Technology Co., Ltd. , https://www.vacuflex-cn.com