As the main place for people to wash daily, the bathroom will undoubtedly play a vital role in life. This includes water and electricity, ceilings, tile tiles, etc. The cleanliness of the bathroom directly determines the quality of life of people. In particular, the basement bathroom design is more careful, and the basement is relatively dark and damp, which is not conducive to the use of various furniture. Therefore, the basement bathroom design and decoration is very important. Let's take a look at the basement bathroom design and the basement toilet drainage. Method it.
Basement bathroom design
1, pay attention to the design of power lines
The primary consideration for basement bathroom design is the source of water, followed by the use of electricity. Because of the proximity to the water source, the design of the power line must not cause any mistakes, especially in the wet basement environment. important. In general, the laying of power lines shall be carried out together with the laying of drainage pipelines. The power lines shall be designed at 30 cm above the drainage pipelines. The drainage pipelines must not be laid in the same place as the power lines for convenience. Not only that, the use of wires must be the best, not only the quality of the internal copper wire must pass, but also the quality of the external insulation layer must be superior, so as to prevent leakage caused by the wet environment of the basement.
2, pay attention to the location of Yuba
In the basement bathroom design, the position of the Yuba must be taken into account. The Yuba is the most powerful electric appliance in the bathroom, and its use is the most frequent. It must pay attention to its safety, not only to provide the temperature for the bathroom, but also to pay attention to the setting of the position. Yuba is usually placed in the center of the bathroom, avoiding cold water as much as possible to prevent unnecessary injuries due to quality problems.
Basement toilet drainage method
The basement is below the water level, and the sewer (ie, the municipal sewer, or the sewer's inflow) is higher than the basement floor, usually less than one metre below the ceiling of the basement. If you want to decorate the toilet in the basement, consider what to do. Sewage was pumped to the head against gravity and pumped to the ceiling.
How to solve this problem? In the past, there was a way to get a pool of water in the ground, made of cement, and pumped on the ground with an agricultural water pump. This method can solve the problem, but the drawbacks are numerous.
1. It occupies space. The basement would definitely want to use more space, but building a puddle would occupy a large area and occupy a lot of space.
2, there is odor, cement walls can not stop the long-term infiltration of sewage, the entire basement will be filled with the smell of biogas after one or two years, not suitable for living.
3, easy to plug, closed up, dirt will be deposited in the water tank, slowly blocked, and the sewage in the basement will not go in.
4. It is inconvenient to maintain. If there are too many dirt deposits in the water tank and you want to clean it up, how can you clean it up? This is another huge project.
5, to spend more money, whether it is, water tanks, or outside the agricultural machinery pumping machine, but also to shop outside the pipeline, and follow-up maintenance, is to spend a lot of money.
Ktv, hotels, etc. will also encounter the same level of sewage problems
Many public places and entertainment venues are rented, but the houses rented by these establishments do not have a full-scale sewage discharge pipe network installed, so that they cannot place toilets, or they can place toilets, but the building's total sewage pipelines are only in the entire area. On one side of the building, if there are multiple toilets to be installed, it will face the problem of drainage in the same floor. If sewage pipes are laid on the floor of the floor, the cost will be high, and because the position of the toilet is far from the sewage pipeline, sewage cannot be provided. Contaminated excrement flows into the sewer pipe due to free centripetal force. Over time, it will clog the pipe and the maintenance will be huge.
Now, a new type of machine is gradually entering everyone’s life. It is a sewage lifter.
Sewage riser (device), consisting of water tank, special water pump (with cutting and drainage as a whole) and liquid level, air or intelligent electronic controller (different types of product control systems are different), with stainless steel cutting crusher holder Special water pump. The riser is sealed as a whole, and all the sewage inlets that enter the riser are provided with anti-backflow devices, and an anti-odor and degerming device is provided at the outlet to ensure that no odor is generated during use and the living environment is polluted.
Basement toilet drainage below the main sewerage: Effluent from toilets or kitchens newly built or remodeled in the basement is lifted to the main sewer or mains.
Concentric drainage away from the main sewer: Places that are away from the main sewers will be newly built or reconstructed by a standard toilet or kitchen room to raise or discharge horizontally to the main sewer or mains.
Connectable bathroom fixtures: toilet, bath, basin, washing machine, air conditioning, kitchen.
Basement toilet drainage program analysis
Basement toilet drainage can not be drained to the outdoor sewage well. Even if the sewage well is lower than the basement, it cannot be directly discharged to prevent backflow of outdoor pipes or heavy rain that floods the outdoor tube well. The main method is to set the pump to lift the water.
1, the traditional way: the toilet underground concrete pool, a submersible sewage pump inside the pit, the sanitary ware drained to the sump, with the pump to the outdoor sewage wells. The disadvantage is that it is not beautiful, there is an inspection port on the ground, pipelines and valves on the ground, all require secondary renovation hidden.
2. Integrated equipment: Special sewage lifting equipment (with built-in water pump and valve) is used, and the volume is small. Each drainage pipe is connected to the inlet of the equipment, which is then pressurized and discharged by the built-in water pump. Need to place equipment in the bathroom pit. Both imported and domestically produced. Due to unused, specific quality and performance should be investigated.
3. Set deep water collection pits and submersible sewage pumps outside the house and set valve wells. The disadvantage is that the outdoor well is not sealed tightly. When the storm rains, the rainwater enters the sump. If the water pump does not drain, the sewage may flow back to the basement.
Summary: The relevant information about basement bathroom design and basement toilet drainage method was introduced here. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Basement Bathroom Bathroom Leak Repair Method 1.5 Square Meter Toilet Decoration Bathroom Cabinet Cabinet Bathroom Cabinet
Connecting Link Coupling,Connecting Link,Safety Hook,Lifting Hook
Shandong Shenli Rigging Co.,LTD. , https://www.shenliriggingcn.com